Duke FlexBake 5 Owner's Manual And Installation Instructions
Ce integrated ventilation system
Hide thumbs
Also See for FlexBake 5:
- Owner's manual (32 pages) ,
- Installation and operation manual (44 pages) ,
- Instruction sheet (8 pages)
Advertisement
Quick Links
Owner's Manual and
Installation Instructions for
FlexBake 5™ CE Integrated
Ventilation System
Model#
IVS-CE-FB5
IMPORTANT INFORMATION, READ BEFORE USE.
PLEASE SAVE THESE INSTRUCTIONS
This manual is Copyright © 2017 Duke Manufacturing Company. All rights reserved.
Reproduction without written permission is prohibited. Duke is a registered
trademark of the Duke Manufacturing Company.
Duke Manufacturing Company
2305 N. Broadway
St. Louis, MO 63102
Phone: 314-231-1130
Toll Free: 1-800-735-3853
Fax: 314-231-5074
www.dukemfg.com
P/N 514134A
01/25/2017
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Duke FlexBake 5
Summary of Contents for Duke FlexBake 5
- Page 1 IVS-CE-FB5 IMPORTANT INFORMATION, READ BEFORE USE. PLEASE SAVE THESE INSTRUCTIONS This manual is Copyright © 2017 Duke Manufacturing Company. All rights reserved. Reproduction without written permission is prohibited. Duke is a registered trademark of the Duke Manufacturing Company. Duke Manufacturing Company 2305 N.
-
Page 2: Table Of Contents
Owner's Manual and Installation Instructions for FlexBake 5™ Integrated Ventilation System TABLE OF CONTENTS Important Safety Instructions Product Descriptions Unpacking and Installation Instructions Oven Start-Up Care and Cleaning Troubleshooting Wiring Schematic... -
Page 3: Important Safety Instructions
• A minimum clearance of 6″ (152,4 mm) from the top of the unit to the ceiling must be provided. • The IVS must be properly attached to the Duke oven that is secured to building structure (Restraining Device Kit). - Page 4 FlexBake 5™ Integrated Ventilation System IMPORTANT SAFETY INSTRUCTIONS (continued) • Turn the FlexBake 5™ Control Power Switch off and disconnect external all poles mains supply then allow unit to cool down before performing any service or maintenance on the unit. •...
-
Page 5: Product Descriptions
Owner’s Manual and Installation Instructions for FlexBake 5™ Integrated Ventilation System PRODUCT DESCRIPTIONS SHIPPING WEIGHT: 164 Lbs. Crated SHIPPING DIMENSIONS: 40.539” x 37.085” x 14.210” Carton Size 45.500” x 42.250” x 21.460” Crated Size MODEL NUMBER IVS-CE-FB5 ELECTRICAL Motor: 230VAC / 50-60HZ, 0.39-0.43A... -
Page 6: Unpacking And Installation Instructions
Owner's Manual and Installation Instructions for FlexBake 5™ Integrated Ventilation System UNPACKING AND INSTALLATION INSTRUCTIONS TOOLS REQUIRED (NOT PROVIDED) FOR THIS INSTALLATION • Hammer • #2 Phillips Screwdriver • Crowbar/Pry Bar • 5/16” Nut Driver • Knife or Box Cutter... - Page 7 TASKS MUST BE PERFORMED BY A QUALIFIED SERVICE TECHNICIAN OR ELECTRICIAN. a. Turn the FlexBake 5™ Control Power Switch off and disconnect external all poles mains supply. b. Remove the façade cover by removing the 16 (#8-32) screws from the top and the 4 (#8-32) screws from...
- Page 8 Owner's Manual and Installation Instructions for FlexBake 5™ Integrated Ventilation System c. Remove the 6 screws (Tek Screws). SAVE SCREWS. d. Disconnect the façade cooling fan and carefully lift the façade off of the oven and save for potential future use (if desired).
- Page 9 Owner’s Manual and Installation Instructions for FlexBake 5™ Integrated Ventilation System STEP 3: REMOVE THE MOTOR SHIELD a. Remove the 4 screws (#10-24) securing the Exhaust Duct Extension. b. Remove the Exhaust Duct Extension and both gaskets and save for potential reuse with the façade, if desired.
- Page 10 Owner's Manual and Installation Instructions for FlexBake 5™ Integrated Ventilation System STEP 4: INSTALL THE IVS ASSEMBLY a. Place the new Exhaust Duct Gasket b. Carefully set the IVS assembly on top of the oven (supplied with the IVS assembly) onto the aligning the IVS duct with the oven Exhaust Duct Exhaust Duct flange.
- Page 11 Owner’s Manual and Installation Instructions for FlexBake 5™ Integrated Ventilation System e. Connect the IVS assembly cooling fan f. Connect the IVS assembly blower motor to the (mounted on side wall)(disconnected in Step. oven harness. 2C). IVS Blower Motor IVS Assembly Cooling Fan Oven Conv.
- Page 12 Owner's Manual and Installation Instructions for FlexBake 5™ Integrated Ventilation System STEP 5: INSTALL THE IVS COVER AND EXHAUST RING a. Place the IVS blower adaptor gasket on to b. Locate the IVS Cover in position as shown. Do the adaptor outlet, as shown.
- Page 13 This oven appliance must be secured to building structure. A restraining device kit (#153586) was provided with the FlexBake 5™ unit to limit the movement of the appliance without depending on or transmitting stress to the electrical conduit. Installation instruction is in the kit.
-
Page 14: Oven Start-Up
Owner's Manual and Installation Instructions for FlexBake 5™ Integrated Ventilation System OVEN START-UP WARNING ELECTRICAL SHOCK HAZARD. TASKS MUST BE PERFORMED BY A QUALIFIED SERVICE TECHNICIAN OR ELECTRICIAN. a. Have a qualified service technician or electrician connect the oven to the power supply. -
Page 15: Troubleshooting
Owner’s Manual and Installation Instructions for FlexBake 5™ Integrated Ventilation System TROUBLESHOOTING There are no user serviceable parts on the Duke IVS. If there is a malfunction, contact your Duke Manufacturing authorized service agent or call 1-800-735-3853. WIRING SCHEMATIC Oven Conv. - Page 16 Owner's Manual and Installation Instructions for FlexBake 5™ Integrated Ventilation System Duke Manufacturing Co. 2305 N. Broadway St. Louis, MO 63102 Phone: 314-231-1130 Toll Free: 1-800-735-3853 Fax: 314-231-5074 www.dukemfg.com...
Need help?
Do you have a question about the FlexBake 5 and is the answer not in the manual?
Questions and answers