Advertisement
Quick Links
PART
Pair of Runners
Phillips Head Screws
1/4-20 Flange Nuts
SLIM 5 SERIES INSTALLATION
1) Install the runners to the enclosure bottom through the holes
shown using the supplied hardware. (FIGURE A)
2) Install the screws and nuts as shown. (FIGURE B)
NOTE: If your Slim 5 does not have the center holes, perform the
following steps:
1) Install the runners using the two outer holes.
2) Drill into the center holes using a 9/32" drill bit.
3) Install the remaining nuts and bolts.
SLIM 5 BOTTOM SHOWN
Instruction Sheet
5-RS Series
5-RS Runner Kits
QTY
SLIM 5 SERIES
2
RUNNER KITS
6
5-RS20
6
5-RS26
FIGURE B
CFR/HRF SERIES
RUNNER KITS
5-RS14 (HRF Only)
5-RS16
5-RS18
5-RS20
5-RS23
DTRK SERIES
RUNNER KIT
5-RS18
FIGURE A
I-00273
Rev E
Advertisement
Related Manuals for Middle Atlantic Products 5-RS Series
Summary of Contents for Middle Atlantic Products 5-RS Series
- Page 1 Instruction Sheet 5-RS Series 5-RS Runner Kits CFR/HRF SERIES PART SLIM 5 SERIES DTRK SERIES RUNNER KITS Pair of Runners RUNNER KITS RUNNER KIT 5-RS14 (HRF Only) Phillips Head Screws 5-RS20 5-RS18 5-RS16 1/4-20 Flange Nuts 5-RS26 5-RS18 5-RS20 5-RS23...
- Page 2 WARRANTY Middle Atlantic Products (the "Company") warrants the 5-RS Series to be free from defects in material or workmanship under normal use and conditions for the lifetime of the product. The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and exclusive remedy, under this warranty shall be limited, at the Company's option, to either (a) return of and refund of the price paid for, or (b) repair or replacement at the Company's factory of the products purchased, or any part or parts thereof, which the Company has determined to be defective after inspection thereof at the Company's factory.