Honda TRX420FPM Owner's Manual page 31

These indicators are identified in the table on pages
words: Lamp Check.
When applicable, the reverse or neutral indicators come on when you
turn the ignition switch ON (
reverse or neutral.
Except TRX420TM
When applicable, the 4WD indicator comes on when you turn the
ignition switch ON (
mode.
If one of these indicators does not come on when it should, have your
dealer check for problems.
Display Check
When the ignition switch is turned ON (
( ) will temporarily show all the modes and digital segments so you can 1
make sure the liquid crystal display is functioning properly.
The displays are identified in the table on page
Display Check.
If any part of these displays does not come on when it should, have your
dealer check for problems.
Indicators & Displays
) and remain on until you shift out of
) and remains on until you shift out of 4WD
(1) multi-function display
24 25 ,
), the multi-function display
25 with the words:
(1)
Instruments & Controls
with the
23