Utilities; Using The Flip Display; Selecting A Basic Zone Bank; Selecting The Power Level - Motorola APX 8000 User Manual

MN001422A01-AW
Chapter 7 : Advanced Features
WF CNTG
In the process of connecting to a found Wi-Fi network.
WF CNTD
Connected to one of the preprogrammed Wi-Fi networks.
NO SERVICE
No available networks or connection with one of the networks failed.
If the radio is Wi-Fi connected, you see a Wi-Fi signal strength indicator,
7.24

Utilities

This chapter explains the operations of the utility functions available in your radio.
7.24.1

Using the Flip Display

When and where to use: This feature allows you to flip the content of the top display upside down.
It is particularly useful when you would like to read the top display while the radio is still in the carry
holder attached to your belt.
Procedure:
To flip the display, press and hold the programmed Light/Flip button.
7.24.2

Selecting a Basic Zone Bank

Prerequisites: The Basic Zone Select feature must be programmed to the 3-Position A/B/C Switch,
while the Basic Zone Bank feature must be programmed to any side button or Top (Orange) button to
use this feature.
When and where to use: This feature allows twice as many zones to be accessed from a switch,
doubling the amount of switch positions.
Procedure:
1 Use the programmed Basic Zone Bank button to toggle the position between Bank 1 and Bank
2.
The top display shows the status icons (A, B, C, D, E, or F) or the zone name based on the bank
and switch position selected.
NOTE: See the
the status icons.
7.24.3

Selecting the Power Level

This feature enables you to select the power level at which your radio transmits. The radio always
turns on to the default setting. These reduced transmit power level settings do not affect the receiving
performance of your radio, nor diminish the overall quality of the audio and data functionality of
the radio given the following conditions. Power level Low enables a shorter transmitting distance to
conserve power. Power level High enables a longer transmitting distance.
Prerequisites: This feature must be preprogrammed by a qualified radio technician.
70
Basic Zone Bank 1 and Basic Zone Bank 2
on the top display.
icons for more information on