Cleaning And Care; Storage; Troubleshooting - Silvercrest SBHS 50 C2 Operating Instructions Manual

Multi hair styler
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4

Cleaning and care

RISK OF ELECTRIC SHOCK
Before cleaning the appliance, always pull out the plug from the mains
power socket. There is a risk of electric shock!
WARNING! RISK OF INJURY!
Allow the appliance to cool fully before cleaning it. Risk of burns!
CAUTION! PROPERTY DAMAGE!
Do not use any aggressive, abrasive or chemical cleaning agents!
These could damage the upper surfaces of the appliance.
Remove any hair or lint from the bristles of the styling brush 2 with your
fingers.
Clean the appliance only with a lightly moistened cloth.
Allow the appliance to dry completely before reuse or before putting it away.

Storage

You can also hang up the appliance by the hanger 7.
Store the appliance in a clean and dry location.

Troubleshooting

Fault
The appliance
is not working.
No curls form.
GB │ IE
8 
Cause
The plug is not inserted into a
power socket.
The appliance is not switched on. Switch on the appliance.
The appliance is defective.
The level switch 6 is set to
position "1".
The appliance is defective.
Remedy
Insert the plug into a mains
power socket.
In this case, contact
Customer Services.
Adjust the level to "2". Your
hair is too thick for level "1".
In this case, contact
Customer Services.
SBHS 50 C2

Advertisement

Table of Contents
loading

This manual is also suitable for:

416824 2210

Table of Contents