Description Of The Washing Machine; Control Panel; Display - Hotpoint WMJLD 943 Instructions For Use Manual

Table of Contents

Advertisement

Description of the washing machine

Control panel

GB
Detergent dispenser drawer
Detergent dispenser drawer: used to dispense
detergents and washing additives (see "Detergents and
laundry").
ON/OFF button
chine on or off. The START/PAUSE indicator light, which
flashes slowly in a green colour shows that the machine is
switched on. To switch off the washing machine during the
wash cycle, press and hold the button for approximately 3
seconds; if the button is pressed briefly or accidentally the
machine will not switch off. If the machine is switched off
during a wash cycle, this wash cycle will be cancelled.
WASH CYCLE SELECTOR buttons: used to set the
desired wash cycle (see "Table of wash cycles").
MY CYCLE button: press and hold the button to store a
cycle with your own set of preferences in the memory of
the machine. To recall a previously stored cycle, press the
MY CYCLE button.
FUNCTION buttons: press the button to select the
desired function. The corresponding indicator light on the
display will switch on.
CLEANING ACTION button: to select the desired wash
intensity.
ANTI ALLERGY RINSE button: press to select the desi-
red rinse type.
SPIN button: press to reduce or completely exclude the
spin cycle - the value is indicated on the display.
8
: press this briefly to switch the ma-
ON/OFF
button
MY
WASH
CYCLE
CYCLE
button
SELECTOR
buttons
ANTI
ALLERGY
RINSE
button
TEMPERATURE button: press to decrease the tempera-
ture: the value will be shown on the display.
CHILD LOCK button: to activate the control panel lock,
press and hold the button for approximately 2 seconds.
When the symbol
locked (apart from the ON/OFF button). This means it
is possible to prevent wash cycles from being modified
accidentally, especially where there are children in the
home. To deactivate the control panel lock, press and hold
the button for approximately 2 seconds.
DELAY button: press to set a delayed start time for the
selected wash cycle. The delay time will be shown on the

display.

START/PAUSE button with indicator light: when the gre-
en indicator light flashes slowly, press the button to start a
wash cycle. Once the cycle has started the indicator light
will remain lit in a fixed manner. To pause the wash cycle,
press the button again; the indicator light will flash in an
orange colour. If the symbol
may be opened (wait approximately 3 minutes). To start
the wash cycle from the point at which it was interrupted,
press the button again.
Standby mode
This washing machine, in compliance with new energy sa-
ving regulations, is fitted with an automatic standby system
which is enabled after about 30 minutes if no activity is
detected. Press the ON-OFF button briefly and wait for the
machine to start up again.
CLEANING
SPIN
ACTION
button
button
DISPLAY
START/PAUSE
button with
indicator light
FUNCTION
buttons
DELAY
TEMPERATURE
button
button
CHILD LOCK
button
is illuminated, the control panel is
is not illuminated, the door

Advertisement

Table of Contents
loading

Table of Contents