Table of Contents
Advertisement
Quick Links
Instructions for use
GB
English,1
WMJLL 742
WASHING MACHINE
Contents
Installation, 2-3-4-5
Connecting the electricity and water supplies
Cutting off the water or electricity supply
Wash cycles, 10
Table of wash cycles
Personalisation, 11
Troubleshooting, 13-14
tion, 15
GB
1
Advertisement
Table of Contents
Related Manuals for Hotpoint WMJLL 742
Summary of Contents for Hotpoint WMJLL 742
-
Page 1: Table Of Contents
Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 7 General safety Disposal WMJLL 742 Description of the washing machine and starting a wash cycle, 8-9 Control panel Indicator lights Starting a wash cycle... -
Page 2: Installation
Installation 2. If the floor is not perfectly level, compensate ! Keep this instruction manual in a safe place for any unevenness by tightening or loosening for future reference. Should the appliance be sold, transferred or moved, make sure the the adjustable front feet (see figure);... - Page 3 Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate Connect the drain fixed on the machine. hose, without ben- • the socket is compatible with the washing ding it, to a draining machine’s plug.
-
Page 4: The First Wash Cycle
Technical data If you are in any doubt regarding the electrical supply to your machine, consult a qualified Model WMJLL 742 electrician before use. How to connect an alternative plug: width 59.5 cm The wires in this mains lead are coloured in... -
Page 6: Care And Maintenance
Care and maintenance Cutting off the water and electri- Caring for the door and drum of city supplies your appliance • Turn off the water tap after every wash cycle. • Always leave the porthole door ajar in order This will limit wear on the hydraulic system in- to prevent unpleasant odours from forming. -
Page 7: Precautions And Tips
Precautions and tips environment. The crossed out “wheeled bin” symbol on This washing machine was designed and constructed in the product reminds you of your obligation, that when accordance with international safety regulations. The fol- you dispose of the appliance it must be separately col- lowing information is provided for safety reasons and must lected. -
Page 8: Description Of The Washing Machine And Starting A Wash Cycle
Description of the washing machine and starting a wash cycle Control panel WASH CYCLE PROGRESS indicator lights SPIN SPEED knob DOOR ON/OFF button LOCKED TEMPERATURE indicator light knob START/PAUSE button with indicator light FUNCTION Detergent dispenser drawer buttons with indicator lights WASH CYCLE knob Detergent dispenser drawer: used to dispense... -
Page 9: Indicator Lights
Indicator lights Door locked indicator light If this indicator light is on, the appliance door is locked to The indicator lights provide important information. prevent it from being opened accidentally; to avoid any This is what they can tell you: damage, wait for the indicator light to switch off before you open the appliance door (wait approximately 3 minutes). -
Page 10: Wash Cycles
Wash cycles Table of wash cycles Detergents Max. Max. Description of the wash cycle temp. speed (°C) (rpm) CLEAN Plus 1 Anti Stain 40° 1400 180’ 2 Anti Stain Quick 40° 1200 60’ 3 Whites 60° 1400 180’... -
Page 11: Personalisation
Personalisation Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash ( ). The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. -
Page 12: Detergents And Laundry
Detergents and laundry Detergent dispenser drawer Whites: use this cycle 3 to wash white clothes. The pro- gramme is designed to maintain the brightness of white Successful washing results also depend on the correct clothes over time. Use powder detergent for best results. dose of detergent: adding too much detergent will not Anti Allergy: use programme 6 to remove major allergens necessarily result in a more efficient wash, and may in fact... -
Page 13: Troubleshooting
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Possible causes / Solutions: Problem: • The appliance is not plugged into the socket fully, or not enough to make contact. The machine does not switch on. - Page 14 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
-
Page 15: Product Guarantee And Repair Information
Product Guarantee and Repair Information Guarantee Recycling and Disposal Information As part of Hotpoint’s continued commitment to 12 Months Parts and Labour Guarantee helping the environment, Hotpoint reserves the right Your appliance has the benefit of our manufacturer’s to use quality, recycled components to keep down guarantee, which covers the cost of breakdown customer costs and minimise material wastage. - Page 16 195146265.00 05/2016 İthalatçı Firma: Indesit Company Beyaz Eşya PAZARLAMA A.Ş. Balmumcu Cad. Karahasan Sok. No: 11, 34349– Balmumcu Beşiktaş – İstanbul Tel: (0212) 355 53 00 www.hotpoint.co.uk...