Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Hotpoint Style WMYL 8352

  • Page 1: Table Of Contents

    Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 7 General safety Disposal WMYL 8352 Opening the porthole door manually Description of the washing machine and starting a wash cycle, 8-9 Control panel Indicator lights...
  • Page 2: Installation

    Installation ! Keep this instruction manual in a safe place the adjustable front feet (see figure); the an- for future reference. Should the appliance be gle of inclination, measured according to the worktop, must not exceed 2°. sold, transferred or moved, make sure the Levelling your appliance correctly will provide instruction manual accompanies the washing it with stability and avoid any vibrations, noise...
  • Page 3: Connecting The Drain Hose

    Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate Connect the drain fixed on the machine. hose, without ben- • the socket is compatible with the washing ding it, to a draining machine’s plug.
  • Page 4: The First Wash Cycle

    If you are in any doubt regarding the electrical Technical data supply to your machine, consult a qualified electrician before use. Model WMYL 8352 How to connect an alternative plug: width 59.5 cm The wires in this mains lead are coloured in Dimensions...
  • Page 6: Care And Maintenance

    Care and maintenance Cutting off the water and electri- To access the pre-chamber: city supplies 1. using a screwdri- ver, remove the cover • Turn off the water tap after every wash cycle. panel on the lower This will limit wear on the hydraulic system in- front part of the wa- side the washing machine and help to prevent shing machine (see...
  • Page 7: Precautions And Tips

    Precautions and tips Opening the porthole door manually This washing machine was designed and constructed in accordance with international safety regulations. The fol- In the event that it is not possible to open the porthole lowing information is provided for safety reasons and must door due to a powercut, and if you wish to remove the therefore be read carefully.
  • Page 8: Description Of The Washing Machine And Starting A Wash Cycle

    Description of the washing machine and starting a wash cycle Control panel WASH CYCLE PROGRESS indicator lights SPIN SPEED knob DOOR ON/OFF button LOCKED TEMPERATURE indicator light knob START/PAUSE button with indicator light FUNCTION Detergent dispenser drawer buttons with indicator lights WASH CYCLE knob Detergent dispenser drawer: used to dispense...
  • Page 9: Indicator Lights

    Indicator lights Door locked indicator light If this indicator light is on, the appliance door is locked to prevent it from being opened accidentally; to avoid any The indicator lights provide important information. damage, wait for the indicator light to switch off before you This is what they can tell you: open the appliance door.
  • Page 10: Wash Cycles

    Wash cycles Table of wash cycles Detergents Max. Max. Description of the wash cycle temp. speed (°C) (rpm) CLEAN Plus 1 Anti Stain 40° 1350 180’   2 Whites 60° 1350 180’   60° 1.20 215’ Cotton Standard 60° (1): heavily soiled whites and resistant colours. 1350 ...
  • Page 11: Personalisation

    Personalisation Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash ( ). The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle.
  • Page 12: Detergents And Laundry

    (*). Deter- best possible care. gent should only be poured into Wool: the wool wash cycle on this Hotpoint machine has the compartment 1. been tested and approved by The Woolmark Company for washing wool garments labelled as hand washable...
  • Page 13: Troubleshooting

    Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Possible causes / Solutions: Problem: • The appliance is not plugged into the socket fully, or not enough to make contact. The machine does not switch on.
  • Page 14 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
  • Page 15: Assistance

    OR NON-DOMESTIC PREMISES. 5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time.
  • Page 16: After Sales Service

    Republic of Ireland: 0818 313 413 www.hotpointservice.co.uk Appliance Registration We want to give you additional benefits of Hotpoint ownership. To activate your free 5 year parts guarantee you must register your appliance with us. UK: 08448 24 24 24 Republic of Ireland: 01 230 0800 www.hotpointservice.co.uk...

This manual is also suitable for:

Wmfl 853Wmsl 521Hf8b 593

Table of Contents