Wash Cycles And Functions; Table Of Wash Cycles; Wash Functions - Hotpoint WMJLD 943 Instructions For Use Manual

Wash cycles and functions

Table of wash cycles

Description of the wash cycle
CLEAN Plus
1 Anti Stain (1st press of the button)
1 Anti Stain Quick (2nd press of the button)
2 Cotton (Cottons) (1st press of the button): heavily soiled whites and delicate
colours.
2 Cotton 20°C (Cottons) (2nd press of the button): lightly soiled whites and deli-
cate colours.
2 Eco Cotton 60°C (Eco Cottons) (3rd press of the button) (1): heavily soiled
whites and delicate colours.
2 Eco Cotton 40°C (Eco Cottons) (3rd press of the button) (2): lightly soiled
whites and delicate colours.
3 Synthetics (Synths Resistant) (1st press of the button): heavily soiled resi-
stant colours.
3 Synthetics (Synths Resistant) (1st press of the button) (3): lightly soiled re-
sistant colours.
3 Synthetics (Synths Delicate) (2nd press of the button): lightly soiled delicate colours.
SPECIALS
4 Fast Wash 60': to refresh normal soiled garments quickly (not suitable for
wool, silk and clothes which require washing by hand).
M My Cycle (Memory): allows for any wash cycle to be stored.
6 Fast Wash 15': to refresh lightly soiled garments quickly (not suitable for
wool, silk and clothes which require washing by hand).
EXTRA CARE
7 Wool (Woolmark Platinum): for wool, cashmere, etc.
8 Delicates
Spin (1st press of the button)
Rinse (2nd press of the button)
Pump out (3rd press of the button)
**
The duration of the wash cycles can be checked on the display.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 2 with a temperature of 60°C (3rd press of the button).
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for
garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle 2 with a temperature of 40°C (3rd press of the button).
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for
garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle 2 with a temperature of 40°C (3rd press of the button).
3) Long wash cycle for synthetics: set wash cycle 3 "60°C" (1st press of the button); with a temperature of 40°C (press TEMPERATURE button).

Wash functions

If the selected function is not compatible with the
!
programmed wash cycle, the indicator light will flash and
the function will not be activated.
If the selected function is not compatible with another
!
function which has been selected previously, the indicator
light corresponding to the first function selected will flash
and only the second function will be activated; the indicator
light corresponding to the enabled function will remain lit.
Time Saver
If you select this option, the wash cycle duration will be
reduced by up to 50%, depending on the selected cycle,
thereby guaranteeing simultaneous water and energy
saving. Use this cycle for lightly soiled garments.
Detergents
Max.
temp.
(°C)
40° 1400

40° 1200

60°
1400 
(Max. 90°)
20° 1400

60° 1400

40° 1400

60° 1000

40° 1000

40° 1000 
60° 1400

30° 800

40° 800

30° 0 
- 1400 -
- 1400 -
- 0 -
Reduced Creases
By selecting this function, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine will perform
slow rotations of the drum; the "Reduced Creases"
indicator light will flash and the text "END OF CYCLE" will
appear on the display. To end the cycle, press the START/
PAUSE button or the "Reduced Creases" button.
Eco Wash
The Eco Wash function saves energy by not heating the
water used to wash your laundry – an advantage both to
the environment and to your energy bill. Instead, intensified
wash action and water optimisation ensure great wash
results in the same average time of a standard cycle.
For the best washing results we recommend the usage of
a liquid detergent.
5 - - - **

4,5 - - - **

 9 - - - **
9 - - - **

9 53 1,15 57,4 240'

9 53 1,10 97 225'

4,5 46 1,03 65 135'

4,5 - - - **

 4,5 - - - **
3,5 53 0,84 44 60'

3,5 71 0,11 33 15'

2 - - - **

 1 - - - **
- 9 - - - **
9 - - - **

- 9 - - - **
11
GB