Table of Contents
Advertisement
Service Parts
Listings of service parts for all units are available from the Re-
placement Components Division's Electronic Parts Informa-
tion Catalog (EPIC). EPIC is available at Totaline stores, dis-
tributor and service office parts departments and online at
HVACPartners.com.
When entering EPIC, the full unit model number is required.
The model number includes the Design Revision reference val-
ue (this value is used only by the factory and is Position 18,
value A standard). The unit model number is available from
the unit's information data plate. (Do not use the "catalog num-
ber" when using EPIC. The "catalog number" suppresses the
Design Revision value; failure to include Design Revision val-
ue may cause an incorrect unit parts list to be displayed.) When
using EPIC, enter first four digits of the model number only.
Find appropriate model from sales packages listed. Be sure to
choose correct voltage and Design Revision.
EPIC is a product of RCD. To comment to the EPIC program,
use the "Comment" button inside the EPIC program.
FASTENER TORQUE VALUES
Compressor mounting bolts
Condenser fan motor mounting bolts
Condenser fan hub setscrew
High-flow service port
Schrader-type service check valve
Compressor oil sight glass thread
Compressor to Compressor rail torque
Compressor rail to base pan torque
35
65-75 in.-lb
(734-847 N-cm)
20 ±2 in.-lb
(226 ±23 N-cm)
84 ±2 in.-lb
(949 ±136 N-cm)
96 ±10 in.-lb
(1085 ±23 N-cm)
2-3 in.-lb
(23-34 N-cm)
330±31 in.-lb
(23-34 N-cm)
120-168 in.-lb
(1356-1898 N-cm)
70 ±5 in.-lb
(791 ±57 N-cm)
Advertisement
Table of Contents
