Bahco BCL33IW1K1 Manual page 7

5. SPECIFIC SAFETY RULES AND/OR SYMBOLS
Recycle
Do not incinerate and put the battery
Do not wet
Alternating Current
a.c.
Watts
W
Hz
Kilograms
kg
Kilograms - Centimeter
kg-cm
6. FEATURE
1
7. OPERATING INSTRUCTIONS
Removing or Installing Battery Pack
Charging the Battery Pack
1. Connect the plug to the charger before charging.
2. Plug the fast charger into the power source.
3. Slide the battery pack into the charger as the arrow direction shown on the charger.
2
1. Always switch off the machine before insertion or removal of the
battery pack.
2. To remove the battery pack, push the button on the battery pack and
pull the tool unit from the battery pack in the direction.
3. To insert the battery pack, align the tool unit slides with the battery
pack sliding groove and push the tool unit into place.
The tool unit can be slide into battery pack in two directions.
4. Do not force the battery pack in sliding it into tool unit. If the battery
pack does not slide in easily, it is not being inserted correctly.
Do not throw in Garbage
Do not recharge if the battery is broken
or damaged
Risk of electric shock
Direct Current
d.c.
Volts
V
Revolutions or Reciprocations per Minute
/min
Millimeter
mm
Foot-Pound
ft-lb
3
4
Two Torque Adjustment Knob
1.
2.
3.
4.
• •
7
Square drive
Main Switch
Carbon Brush Cover
Forward/Reverse Rod