BenQ LK954ST User Manual page 40

4. Main menu: Installation
Structure
Menu
Projector Position
3D Keystone
Auto Vertical Keystone
12V Trigger
Test Pattern
High Altitude Mode
Serial Port Setting
Corner Fit
Image Resizing
Warping
Image Memory
Function descriptions
Menu
Projector
Position
3D Keystone
Auto Vertical
Keystone
12V Trigger
40 Menu operation
Port Selection
Baud Rate
Digital Zoom
Digital Shrink & Shift
Blanking
Enable
Warping Pattern
Warping Background
Warping Correction
Reset
Save Image Memory
Apply Image Memory
Rename
The projector can be installed on a ceiling or behind a screen, or with one or
more mirrors. See Choosing a location on page 10
See Correcting keystone on page 16
Automatically corrects the keystoning at the left/right side of the projected image.
There is one 12V trigger that works independently according to your needs for
installation scenarios.
• Off: If this is selected, the projector will not send electronic signal out when it is
turned on.
• On: The projector will send a low to high electronic signal out when it is turned
on, a high to low signal out when it is turned off.
Options
Front/Front Ceiling/Rear/Rear Ceiling
H: -40 – +40
V: -40 – +40
R: -40 – +40
Off/On
Off/On
On/Off
On/Off
RS232/HDBaseT
9600/14400/19200/38400/57600/115200
0~60
1.0X – 1.8X/2.0X
0.75X~1.0X
Modes of Adjustment
Top
Bottom
Left
Right
On/Off
5x3/10x5/15x9/24x15
Reset/Cancel
Memory-1/Memory-2/Memory-3/
Memory-4/Memory-5
Descriptions
for details.
for details.