Fuses - ABB EBN861 Operating Instruction

40 EBN853 / EBN861 ELECTRONIC UNIT | OI/EBN853/EBN861/EX-EN REV. C
... 11 Repair

Fuses

Type Fuse
EBN853 External fuse
Mains fuse
Analog input
Brake fuse
DC link fuse
Heater (optional)
EBN861 External fuse*
Brake fuse
DC link fuse
Fuse for binary outputs (3x)
Heater (optional)
* The 35 A safety fuse and the 16 A thermal circuit breaker are included in the scope of delivery. The conductor cross-section between the fuse and the electronic
system must be at least 2.5 mm
Change from one to two columns
Installation location
External
Connection area
Connection area
Power supply board
Power supply board
Connection area
External
Power supply board
Power supply board
Connection area
Connection area
2
(14 AWG).
Design Rated current of fuse
at 115 V AC
– 16 A, time-lag
G-fuse cartridge 12.5 A, time-lag
5 × 20 mm
G-fuse cartridge 40 mA, fast-acting
5 × 20 mm
G-fuse cartridge 0.315 A, medium time-lag 0.315 A, medium time-lag
5 × 20 mm
G-fuse cartridge 10 A, super fast-acting
6.3 × 32 mm
G-fuse cartridge 2 A, time-lag
5 × 20 mm
Safety fuse / thermal –
circuit breaker
G-fuse cartridge –
5 × 20 mm
G-fuse cartridge –
6.3 × 32 mm
G-fuse cartridge –
5 × 20 mm
G-fuse cartridge 2 A, time-lag
5 × 20 mm
at 230 V AC
16 A, time-lag
10 A, time-lag
40 mA, fast-acting
10 A, super fast-acting
2 A, time-lag
35 A / 16 A
0.315 A, medium time-lag
16 A, super fast-acting
0.2 A, medium time-lag
2 A, time-lag