SAFETY INFORMATON 1.2 Operating Safety Familiarity and proper training are required for the safe operation of equipment! Equipment operated improperly or by untrained personnel can be dangerous! Read the operating instructions and familiarize yourself with the location and proper use of all instruments and controls.
OPERATION 3. Fuel Use automotive gasoline (Unleaded or lowleaded is preferred to minimize combustion chamber deposits). Never use an oil/gasoline mixture or dirty gasoline. Avoid getting dirt, dust or water in the fuel tank. 4. Retightening bolts and nuts Check for loose bolts and nuts. Tighten the bolts and nuts properly and securely, if necessary.
OPERATION NOTE: Make sure to refill the fuel tank in time. Do not let the engine run so all the fuel is used. This might cause starting problems. Prevent the screed of sinking into the concrete. After the engine has been switched on, immediately move the Screed Easy backwards.
MAINTENANCE 3 MAINTENANCE The screed is designed to give many years of trouble free operation. It is recommended that an approved dealer carries out all major maintenance and repairs. Always use our genuine replacement parts, the use of spurious parts may void your warranty. It is recommended to spray the aluminum blade and quick disconnector prior to operation, with a high quality form oil.
MAINTENANCE RECORD PREVENTATIVE MAINTENANCE AND ROUTINE SERVICE PLAN BravePro screed has been assembled with care and will provide years of service. Preventative maintenance and routine service are essential to the long life of your screed. After reading through this manual thoroughly, you will find that you can do some of the regular maintenance yourself.