Safety Information; Operating Safety; Operator Safety While Using Internal Combustion Engines - Brave PRO BRPS105H Operator's Manual

Surface finishing screed
Table of Contents

Advertisement

SAFETY INFORMATON

1.2 Operating Safety

Familiarity and proper training are required for the safe operation of equipment!
Equipment operated improperly or by untrained personnel can be dangerous! Read the
operating instructions and familiarize yourself with the location and proper use of all
instruments and controls. Inexperienced operators should receive instruction from
someone familiar with the equipment before being allowed to operate the machine.
l
NEVER
allow improperly trained personnel to operate this machine.
l NEVER
leave a running machine unattended.
l NEVER
use choke to stop engine.
l
NEVER
operate the machine in areas where explosions may occur.
l
ALWAYS
attempting to operate equipment.
l
ALWAYS
techniques before using this machine.
l
ALWAYS
hearing protection, and safety shoes.
l
ALWAYS
away from the moving parts of the machine.
l
ALWAYS

1.3 Operator Safety while using Internal Combustion Engines

l
DO NOT smoke when refueling the engine or during any other fuel handling
operation.
l
DO NOT refuel a hot or running engine.
l
DO NOT refuel the engine near an open flame.
l
DO NOT spill fuel when refueling the engine.
l
DO NOT run the engine near open flame.
l
ALWAYS refill fuel tank in well-ventilated area.
l
ALWAYS check fuel lines, fuel cap, and fuel tank for leaks and cracks before
starting engine. Do not run machine if fuel leaks are present, or fuel cap or fuel
lines are loose.
l
Avoid prolonged breathing of exhaust gases.
l
Avoid contact with hot exhaust systems and engine parts.
l
Allow engine to cool before performing any repairs or service.
l
ALWAYS transport and handle fuel only when contained in approved safety
containers.
l
ALWAYS keep the area around the muffler free of debris such as leaves, paper,
cartons, etc. A hot muffler could ignite the debris and start a fire.
read, understand, and follow procedures in Operation Manual before
be sure operator is familiar with proper safety precautions and operation
wear protective clothing while operating. Wear goggles or safety glasses,
remain aware of moving parts and keep hands, feet, and loose clothing
turn engine OFF when the machine is not being operated.
3

Advertisement

Table of Contents
loading

Table of Contents