8.3 Operating Steps (OFFLINE MODE)
Step 1 / Standby Mode
After power-on, blue light (READY), green light (CHARGE) and red light (FAULT) all lit. Enter standby
mode and the blue light (READY) is steady on.
Step 2 / Tap the RFID Card
Please plug the charging connector into the vehicle charging inlet. When you tap the RFID card first, it
needs to complete the insertion of the charging connector within 120 seconds, otherwise you need to tap the
RFID card again.
Intellectual property of EVBOLT, Inc
Page 15 of 19