Tools And Materials Required - EVBOLT APEX 10 User Manual

7.3 Tools and Materials Required

Tools required to install the Wall-Mounted charger:
• Wire stripper
• Phillips screwdriver for M5
• Slotted screwdriver for 4~5.5 mm
• Adjustable Wrench M6
• Head gasket screw 10-10.5 mm
• Voltmeter or digital multi-meter (for measuring AC voltage at the installation site)
• The inserting cable should meet the best waterproof performance. It is recommended to use 3
cores/7AWG cable (XLPE or equivalent cable) to pull the cable from the distribution box
• Level ruler
• Pencil or marker
• Machine drill
INSTALLATION INSTRUCTIONS
"This device shall be mounted at a sufficient height from grade such that the height of the storage means for the
coupling device is located between 600 mm (24 inches) and 1.2 m (4 feet) from grade."
Intellectual property of EVBOLT, Inc
Page 11 of 19