Download Print this page

KMART 43240661 Assembly Instructions

Download this manual

ASSEMBLY INSTRUCTIONS

Keycode: 43240661

1. Installation

1. Install the front

wheel by pushing

the spring buckles

of two sides

5. Assemble the seat

with part 2 screws

2. Foldable Frame

1. Unlock the safety

3. Adjustment of the length of push bar

1. Pull the red quick

release upwards

2. Install the front

fender, then assemble

the front fork

6. Assemble the basket

with part 3 screws

2. Pull or push the push bar until the spring

buckle pops out from the hole which

corresponds to the required height, then pull

the red quick release downwards to tighten it.

3. Install the cap and

handlebar by

tightening the screw

7. Remove the plug,

insert the push bar,

then lock the safety pin

2. Sliding the folding

handle backwards, then

pull seat up

4. Assemble the rear

wheels by pressing the

buttons

8. Install the cup holder

Spare Parts

Page 1 ASSEMBLY INSTRUCTIONS Keycode: 43240661 1. Installation 2. Install the front 1. Install the front 3. Install the cap and 4. Assemble the rear fender, then assemble wheel by pushing handlebar by wheels by pressing the the front fork the spring buckles...
Page 2 3. All screw components should be checked regularly to ensure they are tightened correctly. 4. Use a damp cloth to wipe clean the trike frame. MADE IN CHINA FOR AU / NZ: IMPORTED FOR KMART STORES IN AUSTRALIA AND NEW ZEALAND. FOR USA: IMPORTED BY ANKO RETAIL INC.