Traction Control - Mercury Milan 2009 Manual

Table of Contents

Advertisement

Driving
Button functions
Default at start-up
Button pressed
momentarily
Button pressed
again after
deactivation
TRACTION CONTROL™ (IF EQUIPPED)
The Traction Control™ system helps you maintain the stability and
steerability of your vehicle, especially on slippery road surfaces such as
snow- or ice-covered roads and gravel roads. The system will allow your
vehicle to make better use of available traction in these conditions.
During Traction Control™ operation,
the traction control active light will
illuminate, you may hear an electric
motor type of sound coming from
the engine compartment, and the
engine may not "rev-up" when you
push further on the accelerator. This is normal system behavior and
should be no reason for concern.
WARNING: Aggressive driving in any road conditions can cause
you to lose control of your vehicle increasing the risk of severe
personal injury or property damage. The occurrence of a Traction
Control™ event is an indication that at least some of the tires have
exceeded their ability to grip the road; this may lead to an increased
risk of loss of vehicle control, vehicle rollover, personal injury and
death. If you experience a severe road event, SLOW DOWN.
208
2009 Milan (mln)
Owners Guide
USA (fus)
AdvanceTrac Features
"Sliding car"
icon
Illuminated
during bulb
Enabled
check
Illuminated solid
Enabled
Not illuminated
Enabled
Traction
ESC
Control
Enabled
Disabled
Enabled

Advertisement

Table of Contents
loading

Table of Contents