Advertisement
Quick Links
Owner's Manual
Model No. 875.199340
3/8-in.
Ratchet
Wrench
Unpacking
When
unpacking
this
product,
carefully
inspect
for any damage
that may have
occurred
during
transit.
Make
sure
any
loose
fittings,
bolts,
etc. are tightened
before
putting
this
product
into service.
WARNING:
Please
read and save these safety
and operating
instructions.
Read carefully
before
attempting
to assemble,
install,
operate
or maintain
the product
described.
Protect
yourself
and others by observing
all safety
information.
Failure
to comply
with
instructions
could result
in personal
injury
and/or property
damage!
Retain instructions
for future reference.
Sears,
Roebuck
and Co., Hoffman
Estates,
IL 60179
o807
www.CRAFTSMAN.com
Advertisement
Related Manuals for Craftsman RATCHET WRENCH 875.19934
Summary of Contents for Craftsman RATCHET WRENCH 875.19934
- Page 1 Protect yourself and others by observing instructions could result in personal for future reference. Sears, Roebuck and Co., Hoffman www.CRAFTSMAN.com Owner's Manual Model No. 875.199340 Wrench Unpacking When inspect occurred loose before and operating install, operate...
- Page 2 ONE YEAR FULL WARRANTY _, Specifications CRAFTSMAN _, Product Warranty _, Compressor Requirements If this Craftsman tool fails to give complete Important Safety Instructions satisfaction within one year from the date _, Installation and Operation of purchase, RETURN IT TO ANY SEARS _, Maintenance STORE OR PARTS &...
- Page 3 Owner's Manual Model Disconnect the air tool from air supply before changing tools or attachments, Use attachments servicing and during non-operation. air powered Do not wear loose fitting clothing, accessories scarves, or neck ties in work area. Loose cracks, clothing may become caught in moving Never use mounted points or other parts and result in serious personal injury.
- Page 4 Manual Model of the compressor. The Craftsman 3/8" Drive Ratchet Wrench is designed to operate on 90 PSIG. Lower pressure (below 90 PSI) will reduce This will help minimize...
-
Page 5: Exploded View Drawing
Owner's Manual Model Lubrication Recommended An in-line filter-regulator-lubricator (fig 1) Use air tool oil or any other high grade is recommended as it increases tool life turbine oil containing moisture absorbent, and keeps the tool in sustained operation. rust inhibitors, metal wetting agents and The in-line lubricator should be regularly an EP (extreme pressure) additive. - Page 6 Owner's Manual Model 1. Flush the tool with air tool oil, gum Tool runs 1. Grit or gum in tool solvent, or an equal mixture of SAE 10 slow or will motor oil and kerosene. not operate. after cleaning. 2. Lubricate the tool according 2.