Advertisement
Quick Links
Quick Start Guide
Airborne Direct Ethernet Adapter
ABDG-ET-DP501/IN5010
Revision v2.1
February 2011
Document Number: 940-0193-210
Kit Contents:
Upon receiving the kit please check that you received the following:
ABDG-ET-DP501 or ABDG-ET-DP5010 Unit
5VDC Power Supply (2.1mm barrel jack)
o
included with ABDG-ET_DP501
o
optional for ABDG-ET-DP5010, included only if ordered as an accessory
2dBi, 2.4Ghz 50 ohm, omni-directional antenna
Quick Start Guide
Airborne Direct software and documentation CD
If any of the above contents are missing or appear damaged please contact Quatech Sales support directly at (800) 553-1170 or
support@quatech.com.
What you will need:
To evaluate the unit you will need the following components and facilities:
ABDG-ET-DP501 or ABDG-ET-IN5010 unit with included antenna attached.
Laptop or desktop system with an Ethernet port.
Power outlet for ABDG-ET-DP501/IN5010 power supply. Optionally 5-36 VDC power for the terminal block attachment (IN5010).
802.11b/g network for testing the unit, either AdHoc or Infrastructure (Access Points) mode. The test network configuration must be
known. Required information will include:
o
SSID (Wireless network name).
o
Security settings (WEP, WPA, WPA2, etc.).
o
Security credentials (passphrase, key or certificates).
o
Static IP address, Subnet Mask and Gateway address if static IP addresses are used on the test network.
A web browser on the laptop top or desktop (Internet Explorer, Firefox, Opera and Chrome v4.0 are supported).
Get other manuals https://www.bkmanuals.com
Advertisement
Related Manuals for Quatech ABDG-ET-DP501
Summary of Contents for Quatech ABDG-ET-DP501
- Page 1 Quick Start Guide Airborne Direct software and documentation CD If any of the above contents are missing or appear damaged please contact Quatech Sales support directly at (800) 553-1170 or support@quatech.com. What you will need: To evaluate the unit you will need the following components and facilities: ...
-
Page 2: Getting Started
AirborneDirect™ Ethernet Adapter Quick Start Guide Quatech, Inc. Getting Started: Open the AirborneDirect™ packaging and locate the Install CD. Place the CD in the CD/DVD drive of the laptop or desktop you will be using to configure the AirborneDirect™ device. Follow the on screen directions for installation of the appropriate device software and documentation. - Page 3 AirborneDirect™ Ethernet Adapter Quick Start Guide Quatech, Inc. Right Click the Unmanaged Device then: Select Change Management State Select Manage OEM-Cfg1 Select Device OEM-Cfg1 is Factory Default The device’s status will move to managed and the device will be displayed under the device type/group it belongs to.
-
Page 4: Select Configuration
AirborneDirect™ Ethernet Adapter Quick Start Guide Quatech, Inc. Express Setup Configuration Page When the devices web interface is accessed for the first time an Express Setup page will be shown. This page is designed to allow a quick device set-up by presenting the most popular device configuration options in a single location. For more advanced configurations the full set of options are available in the feature links (left-hand column). - Page 5 AirborneDirect™ Ethernet Adapter Quick Start Guide Quatech, Inc. Step Description Select Wireless LAN Connection Type If you are using Access Points make sure this is set to Infrastructure from the drop down menu. If you want to use AdHoc set this accordingly. Additional settings may be required to fully configure for AdHoc mode.
- Page 6 AirborneDirect™ Ethernet Adapter Quick Start Guide Quatech, Inc. Step Description Optional Restarts the device. After the device as rebooted it will attempt to authenticate to the configured network. As long as the Press Restart [Button] network is in range the wireless interface will connect.
- Page 7 AirborneDirect™ Ethernet Adapter Quick Start Guide Quatech, Inc. Table 3 – DP500 Indicator LED’s Color Airborne Device State POWER Adapter is not powered. Adapter failed Power On Self Test (POST) and is not configured for wireless communication. Adapter passed POST but is not configured for wireless network communication.
- Page 8 5675 Hudson Industrial Parkway Hudson, OH 44236 Tel: 330.655.9000 800.553.1170 support@quatech.com www.quatech.com ©2010-2011 Quatech, Inc. All rights reserved. Get other manuals https://www.bkmanuals.com...