Newcont NTP 6304 Owner's Manual page 3

HANDSET Controls
1. HANDSET ANTENNA
2.NEW CALL/MESSAGE
WAITING LED
INDICATOR
3.LARGE LCD SCREEN
NEW CALL
MSG WAITING
L D C C F
4.TALK BUTTON
5. TEMPORARY TONE
( ) BUTTON *
6. DIRECTORY BUTTON
7. FUNCTION /VOICE
MAIL BUTTON
8. FLASH/EDIT BUTTON
9. VOLUME CONTROL
(HI, MID, LOW) SWITCH
10. BATT LOW
INDICATOR
CALLS BATT MSG DIR
AM MIN SEC RPT
PM NEW TOTAL
11. SCROLL UP-DOWN/
SHIFT LEFT-RIGHT
BUTTON
12. HEADSET JACK
13. TELEPHONE KEYPAD
14. SAVE/REDIAL/PAUSE
BUTTON
15. SCAN/DEL(DELETE)
BUTTON ,
16. CHARGE CONTACTS
HANDSET Controls
1.HANDSET ANTENNA
2 . NEW CALL/MSG(MESSAGE )WAITING LED Indicator: Blinks when recording a new
incoming call or when receiving a Message Waiting signal, if you have subscribed to a
Voice Mail message service from your local telephone company. (See page 13 ).
3. Large LCD Screen: Shows call information, phone status, prompts and directory items.
4. TALK Button: Press to answer an incoming call or to place a call. Press to end
a call.
5. TEMPORARY TONE Button: Press to temporarily change the dialing mode
from PULSE to TONE for rotary service users . (Press once before entering numbers to
access the Answering System or electronic banking services, etc.)
6. DIR button: Press to access names and numbers stored in the DIRECTORY.
FUNC
7. FUNC(FUNCTION)/VOICE MAIL
VOICE MAIL
down to access Special functions operation in STANDBY mode. (For special functions
see page 21). (VOICE MAIL) - Press to automatically dial the Voice Mail Post Code in
your area to access your Voice Mail message in HANG-OFF mode. (Format) - Press to
change the format of the displayed number when reviewing the Caller ID list or phone
book.
8. FLASH/EDIT button: (FLASH) Press to answer a call if you have Call Waiting. (EDIT)
Press to edit listed items.
9. HANDSET Volume Control(hi,mid ,low) Switch: Select the receiver volume level
(HI, MID, LOW).
10. BATT LOW INDICATOR :Appears on the LCD Screen when the battery charge is low.
(See page 28 for detail)
11. Button: Press to move around the Large LCD Screen.
12. HEADSET JACK: For connection your headset plug to enjoy hands-free
communication.(See page 12 for detail.)
13. TELEPHONE KEYPAD: Allows you to make a call depending on pressed button.
(for TELEPHONE KEYPAD characters, see page 26.)
RE/PA
14. Button: (SAVE )Press and hold down to save the changes on the listed items.
SAVE
(REDIAL) Press to redial the last number you dialed. (PAUSE) Press to insert a pause
RE/PA
while dialing. (You will need the
SAVE
Long Distance Access Code.)
15. SCAN/DEL button: (SCAN) Press to change the operating channel when you hear
interference. (DELETE) press and hold down to delete items or individual characters.
16. CHARGE CONTACTS: For charging the BATTERY PACK inside the HANDSET. We
recommend cleaning the CHARGE CONTACTS periodically with a damp cloth.
Button: (FUNCTION)- Press and hold
button to dial numbers which use an alternative