Newcont NTP 6304 Owner's Manual page 2

Special Features
C
ongratulations on your selection of a quality NEWCONT product. With
proper care and by following the setup and user instructions in this manual,
this unit will provide you with years of trouble free service.
NEWCONT
is committed to providing quality products that fit your needs. We
would like to have any comments or suggestions you might have on this product .
You may mail your comments to:
40 Floor, Block C, Electronics science &Technology Bldg,
Shennanzhonglu, Shenzhen , P.R.C
518031
website: www. newcont. com
When examining your new NEWCONT cordless telephone, you will find an array of special
features including:
Filtered Sound System - Receives considerably less noise than conventional cordless
telephones because of a special circuit which delivers the clearest possible reception.
40 Channel Auto Scan - Press the SCAN/DEL button on the HANDSET to find and lock
on to the clearest channel for any call.
Desk or Wall Mount - Use this equipment as a desk phone or as a wall phone .
TONE or PULSE Dialing - Use this phone for either TONE or push-button PULSE(rotary )
dialing .
Automated Functions - Redial the last number called and automatic STANDBY mode.
Security - Ensures greater privacy because a built-in security code with 65,536 combinati-
ons prevents use of your telephone line by another nearby cordless phone.
Dependable Battery - Recharge your BATTERY PACK many times with the built-in charger
The battery low warning tone tells you when the BATTERY PACK needs recharging
(See page 28)
Special Services - Use the FLASH/EDIT button to access special services such as Call
Waiting supplied by your telephone company or company switchboard .
STANDBY Mode - When in STANDBY mode (ON-HOOK),the telephones is capable of
receiving a call. When the HANDSET is on the BASE UNIT, it is automatically in the
STANDBY mode ( ON-HOOK).When the HANDSET is taken off the BASE UNIT, it
remains in the STANDBY mode until you activate the
Battery Power Saver - Once fully charged, in STANDBY mode, the HANDSET can
receive/send calls for a maximum of two days without the need for recharging. Length
of charge depends on frequency of use.
button.
Special Features
Luminous LCD Screen - The LCD Screen emits light for 5 seconds every time you press
any of the TELEPHONE KEYPAD buttons.
HANDSET Ringer Volume Level - Select the ringer volume level (HI, LOW, OFF).
HANDSET Volume Control Switch - Select the receiver volume level(HI.MID,LOW).
HEADSET JACK - Your telephone can utilize a headset for hands-free communication
BELT CLIP- Use the BELT CLIP to hang your HANDSET on your belt.
CALLER ID SYSTEM
Multi-Function Large LCD Screen - Shows the number you are dialing and with Caller
ID service (available through subscription from your local telephone company), displays
information about the caller before you answer the call.
Name and Number Directory - Stores up to 64 names and numbers so that you can call
them with a single key stroke.
Caller List - Available with Caller ID service .Stores up to 80 calls to keep track of every-
one who called. The name, phone number ,time and date of the call are recorded.
Allows you to return their calls with a single key stroke .
Preferred Calls - You can mark the name and number of a welcome caller in the DIREC-
TORY. When that number calls in, the caller's name will appear on the DISPLAY and
a special ring sound will be heard.
Blocked calls - You can mark the name and number of an unwelcome caller in the DIRE-
CTORY When that number calls in, the caller's name will appear on the DISPLAY and
the ringer will be disabled.
Repeat Call Indicator - Shows if a new incoming call has called more than once.
Out of Area Call Indicator - Advises you that the incoming call is not in a Caller ID
service area.
Unknown Call Indicator - Advises you that the origin of the incoming call has no name
and does not support the Caller ID system.
Call Waiting Service - Displays the name and number of the second caller, if you have
subscribed for Call Waiting service from your local telephone company (see page 14).
Voice Mail - Indicates message waiting signal if you subscribed to Voice Mail message
service and requested Visual Message Indication from your local telephone
company. (see page 14).