New Holland TD5.100 Service Manual page 27

21. Remove the circlip (2) from the rear of the prop shaft
and slide the sleeve (1), in the direction shown by the
arrow, until it is free of the splines on the crankshaft.
22. Remove the middle support bolts (1) from the pro-
peller shaft and remove the shaft complete with sup-
port.
23. Remove the retaining bolt (1) from the floor. Remove
the floormat.
24. Loosen the screw (2) of plate (1). Remove the plate
(1).
Engine - Engine and crankcase
48012878 21/12/2016
10.1 [10.001] / 9
20
ANIL12TR00125AB
21
ANIL12TR00126AB
22
ANIL12TR00127AA
23
ANIL12TR00128AB