17. Loosen the clamps and remove the inlet and return
pipes (1) from the fuel tank. Remove the sender line
(2). (if necessary)
18. Remove pipe from Power-Shuttle transmission filter
(1).
19. Remove the front, centre and rear retaining bolts from
the front axle drive shaft guard and remove the guard.
20. Remove the circlip (2) from the front of the prop shaft
and slide the sleeve (1), in the direction shown by the
arrow, until it is free of the splines on the front axle.
Engine - Engine and crankcase
48012878 21/12/2016
10.1 [10.001] / 8
16
ANIL12TR00121AB
17
ANIL12TR00122AB
18
ANIL12TR00123AA
19
ANIL12TR00124AB