Download Print this page

Soundstream Rubicon 102 Owner's Manual And Installation Manual page 4

Soundstream rubicon 102: user guide

Advertisement

l
TOP VIEW (PARTIAL)
7
a
9
5
- R +
\
FRONT VIEW
BOTTOM VIEW (PARTIAL)
11
LML
LEFT
KEY TO CALLOUTS
1.
Power LED - Indicates amplifier power.
2.
Subsonic, Hawkins Bass Control, H.P. Xover Switch
pass filter frequency range. Select "SUB SONIC" to engage the Sub Sonic
filter at 13Hz with no boost. Select "Hawkins Bass Control" to engage the
Sub Sonic filter at 45 Hz with available boost. Select "H.P. XOVER" to engage
the amplifier's high pass filter at 45Hz or 150Hz for running satellite speakers.
3.
Low Pass XOVER Switch
Selectable low pass filter for driving subwoofers
Note: Do not have the I. P. XOVER" and the 'H.P. XOVER"
at 89Wz.
engaged at the same time.
MONO/ST Switch
"MONO" for bridged mono operation with a single input
4.
signal (right channel only). "ST" for normal stereo operation.
FUSE
Main power supply fuse.
value fuse!
6.
Connected to a fuse or circuit breaker, then to the battery's positive
terminal
7.
GND
Main ground connection. Bolt to a clean chassis point in the vehicle.
REMOTE
Remote turn-on input from the head unit. Accepts +12V.
8.
9.
Speaker Connection Terminal
IO.
Input Levels
Independent Left and Right input level controls.
11.
RCA Inputs
Right and Left channel RCA inputs.
12.
Crossover S.I.P.'s
Crossover frequency settings for amplifier.
Selectable high
Warning: Replace only with the same
Speaker connections for Ch's 1 & 2.

Advertisement

loading

This manual is also suitable for:

Rubicon 202Rubicon 302