Download Print this page

Epson TM-U220 Series User Manual page 13

Hide thumbs Also See for TM-U220 Series:

Advertisement

Available languages

Available languages

5. If you are not using a take-up spool, pull out a small amount of roll
paper and close the roll paper cover; then tear off the paper with the
manual cutter. You can skip steps 6 through 11.
6. Type A only: When using 2-ply roll paper, pull out the roll paper to the
bottom front of the printer as a guide, as shown in illustration K.
7. Close the unit, as shown in illustration L.
8. Insert the end of the bottom paper (journal paper) into the paper take-up
spool, as shown in illustration M.
9. Insert the paper take-up spool in the printer. Be sure that the paper is
aligned with the spool's flange, as shown in illustration N.
10. Feed the paper with the FEED button so that the paper is taken up by the
spool.
11. Close the roll paper cover and tear off the roll paper with the manual
cutter, as shown in illustration O.
Note:
Do not open the roll paper cover during printing or paper feeding.
When using the printer, be sure to cut the roll paper with the manual cutter
after paper feeding is complete.
Replacing Roll Paper
1. Open the roll paper cover by using the tab, as shown in illustration H.
2. Types B and D: Remove the used roll paper core.
3. Type A only: Remove the take-up spool, and open the unit by using the
unit open lever, as shown in illustration I; then remove the used roll paper
core.
4. Insert new roll paper. See the section "Inserting Roll Paper".
Troubleshooting
Printing stops before all the lines are printed or the printer prints the same line
repeatedly
If the correct power supply unit is not used, the printer cannot operate
correctly. Make sure the correct power supply unit is connected to the printer,
referring to the table below:
The power supply unit that can be used with the TM-
U220 alphanumeric model (types A, B, and D)
"AC adapter, C", "AC adapter, C1" or "PS-180"
*Multilingual means the printer model that can print any one of the following: Japanese Kanji, Simplified
Chinese, Traditional Chinese, Thai characters, or Korean characters.
The power supply unit that can be used with the TM-
U220 multilingual* model (types A, B, and D)
"PS-180" or "AC adapter, C1"
TM-U220 User's Manual 7
English

Advertisement

loading