Table of Contents

Advertisement

Available languages

Available languages

Quick Links

MOVILIGHT BEAM 150
User Manual – Version 1.0

Advertisement

Table of Contents
loading

Summary of Contents for Mark MOVILIGHT BEAM 150

  • Page 1 MOVILIGHT BEAM 150 User Manual – Version 1.0...
  • Page 2: Safety Instructions

    9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 10. Only use attachments/accessories specified by MARK. 11. Unplug this device during lightning storms or when unused for long periods of time.
  • Page 3 OVERVIEW MOVILIGHT BEAM 150 is a moving head, beam type, with 1 ultra-bright white LED of 150W. It incorporates a 7 color+spot wheel and two gobo wheels. One of them with 8 fixed gobos + spot, and another wheel with 6 rotating gobos + spot. It also incorporates a 3-sided prism with bidirectional rotation.
  • Page 4: Installation

    Rupture prevention The lens should be replaced when they are damaged or present any problem. Replace always with an original lamp from MARK. To prevent falling wounding If the device is going to be transported, please don’t move the package by one person only. Please, verify that the facilities can withstand the weight of the units at least 10 times more.
  • Page 5 6. Do not place any object on the lens. 7. Allow the device to cool 20 minutes before storing. 8. Do not replace with non-original spare parts. Contact your MARK dealer. Transport protect lock In order to protect the equipment, the device has a vertical lock to avoid unwanted movements.
  • Page 6 DMX chain needs to be equipped with a terminating resistor (120 ohm, 1/4 Watt). MOVILIGHT BEAM 150 has on its front panel a touch display in order to navigate through several menus and select functions, settings or information. Before turning on the device, make sure the PAN and TILT locks ARE UNLOCKED.
  • Page 7: Advanced Use

    ADVANCED USE Control touch menus MAIN MENU SUBMENU 1 SUBMENU 2 ADDRESS SET 1-512 AUTO AUTO 1, AUTO 2 RUN MODE SOUND MANUAL MANUAL TEST PAN REVERSE TILT REVERSE DISPLAY SCREEN REVERSE SETUP CHANNEL 16/14/12/10CH SELECT SENSITIVITY 01-100 MOTOR ZERO RESET FACTORY SET VER V1...
  • Page 8 CH10 CH12 CH14 CH16 Function Value Description 49-55 Gobo 7 56-63 Gobo 8 64-70 Shaking speed for gobo 8 from slow to fast 71-77 Shaking speed for gobo 7 from slow to fast 78-84 Shaking speed for gobo 6 from slow to fast 85-91 Shaking speed for gobo 5 from slow to fast 92-98...
  • Page 9: Troubleshooting

    2- Check if the fuse is not blown, if it is, change it with one that keeps the same technical features. If once the fuse is ok the device again blown it, please, don’t change it again, contact the MARK technical service.
  • Page 10: Indicaciones De Seguridad

    9. Instale y sitúe el dispositivo con garras, abrazaderas o de forma soldada entre su base y la sujeción. 10. Únicamente utilice accesorios especificados por MARK. 11. Desenchufe el dispositivo si no va a ser utilizado en largos periodos de tiempo.
  • Page 11: Descripción General

    DESCRIPCIÓN GENERAL MOVILIGHT BEAM 150 es una cabeza móvil tipo Beam con 1 LED de color blanco ultra-brillante de 150 W. Incorpora una rueda de 7 colores+spot y dos ruedas de gobos. Una de ellas con 8 gobos fijos + spot y otra rueda con 6 gobos rotativos + spot.
  • Page 12 Prevención de rotura Las lentes deben ser reemplazadas cuando estén dañadas o presenten algún tipo de problema. Reemplace siempre las partes dañadas por unas originales suministradas por su proveedor MARK. Prevención ante posibles daños Si el dispositivo necesita ser transportado, por favor, evite que lo haga una sola persona. Por favor, verifique que el lugar de instalación es capaz de soportar hasta 10 veces el peso de la unidad y utilice...
  • Page 13 Antes de desembalar compruebe si hay daños y se han debido al transporte. Si encuentra algún daño, no utilice este artículo y póngase en contacto con el distribuidor de MARK. Abra el flightcase y saque la bolsa de plástico interior.
  • Page 14 (120 ohm, 1/4 vatios). MOVILIGHT BEAM 150 tiene en su panel frontal una pantalla para navegar por el menú y la selección de funciones, efectos y ajustes. Para encender la unidad, por favor, conéctela primero a la red, asegúrese de que todo esté...
  • Page 15 USO AVANZADO Menús accesibles desde el panel y teclado: MENÚ PRINCIPAL SUBMENU 1 SUBMENU 2 ADDRESS SET 1-512 AUTO AUTO 1, AUTO 2 RUN MODE SOUND MANUAL MANUAL TEST PAN REVERSE TILT REVERSE DISPLAY SCREEN REVERSE SETUP CHANNEL 16/14/12/10CH SELECT SENSITIVITY 01-100 MOTOR ZERO...
  • Page 16 CH10 CH12 CH14 CH16 Función Valor Explicación 64-70 Velocidad efecto shaking gobo 8 de lento a rápido 71-77 Velocidad efecto shaking gobo 7 de lento a rápido 78-84 Velocidad efecto shaking gobo 6 de lento a rápido 85-91 Velocidad efecto shaking gobo 5 de lento a rápido 92-98 Velocidad efecto shaking gobo 4 de lento a rápido 99-105...
  • Page 17 4- Si usted no puede determinar la causa de los problemas que presenta la unidad, no la desmonte o intente reparar por sí mismo ya que perderá la garantía. 5- Devuelva la unidad a servicio técnico de MARK. Si no responde el protocolo DMX: Posibles problemas: Verifique que el cable de conexión DMX está...

Table of Contents