Configuring The Initial Settings; Specifying The Network Settings - Canon 1440iF Setup Manual

En

Configuring the Initial Settings

Fr
De
Unless otherwise stated, illustrations used in this
It
document are for the 1440iF.
Es
Specifying the Basic
1
Ca
Settings
Eu
When you turn on the machine for the first time, the Setup
Pt
Guide appears on the operation panel. Perform the initial
machine setup by following the on-screen instructions.
El
Operation panel
Da
Nl
No
Sv
Fi
Ru
1.
Uk
Select the language, the country or region,
and then the time zone.
Lv
2.
Set the current date/time.
Lt
Et
Specifying the Security
Pl
2
Settings
Cs
To prevent unauthorized access to the machine, set access
Sk
restrictions for Remote UI.
Sl
What is Remote UI?
Hr
Remote UI allows you to use your computer's Web
browser to check the machine's operating status,
Hu
change settings, and save items to the Address
Book.
Ro
Bg
1.
To use the Remote UI, select <Yes>.
To continue without using the Remote UI, select
Tr
<No> and proceed to step
Ar
Fa
.
3
2
2.
To use System Manager mode, select <Yes>.
• Set the System Manager ID and PIN so that you
can configure the settings for extended functions
and the management of access privileges, etc.
• To continue without using System Manager
mode, select <No> and proceed to step 5.
3.
Set the System Manager ID.
Enter any number and then select <Apply>.
4.
Set the System Manager PIN.
• Enter any number and then select <Apply>.
• Re-enter the same PIN on the next screen as
confirmation and select <Apply>.
* Do not forget your PIN.
5.
To use General User mode, select <Yes>.
• Set the PIN to be used by general users to access
the Remote UI.
• To continue without using General User mode,
select <No> and proceed to step
6.
Set the Remote UI Access PIN.
• Enter any number and then select <Apply>.
• Re-enter the same PIN on the next screen as
confirmation and select <Apply>.
* Do not forget your PIN.
Specifying the Network
3
Settings
Specify the settings for connecting the machine to a
network. Before proceeding, check that the computer and
router are correctly connected to the network.
• You cannot use a wired LAN and a wireless LAN at the
same time.
Wireless LAN
1.
Check the router's "SSID" and "Network
key."
SSID
: XXXXXXXXXXXX
Network key
: XXXXXXXXXXXX
.
3