Auto Operation; Auto Changeover Operation; C/°F Conversion - Friedrich M09CH Operation Manual

Auto operation

(Artificial intelligence)
Cooling-only models
In this mode, the fan speed and the tempera-
ture adjust automatically, based on the room
temperature.
|
1
Press to turn on the power.
f
2
Press repeatedly to select auto opera-
tion.
G H
3
Press or to select the desired
operation code if the temperature is higher
or lower than the desired temperature.
NOTE
!
• In this mode, you cannot adjust the fan
speed, but you can set the air deflector
to rotate automatically.
• This function may not be supported,
depending on the model.
Code Description
2 Cool
1 Cool slightly
Maintain
0
room
temperature
-1 Heat slightly
-2 Heat
ADVANCED FUNCTIONS

Auto Changeover operation

This mode changes the operation mode auto-
matically to maintain the set temperature
at ±2°C.
|
1
Press to turn on the power.
f
2
Press repeatedly to select the auto
changeover operation.
C
- is displayed on the display screen.
G H
3
Press or to set the desired tem-
perature.
- The temperature range is 64°F(18°C)-
86°F(30°C).
g
4
Press repeatedly to select the fan
speed.
NOTE
!
This function may not be supported,
depending on the model.
°C/°F Conversion
The unit changes from °C to °F or from °F
to °C if Room Temperature KEY is pressed for
5 seconds.
15