Service Contact Information - A.O. Smith 101 Series Instruction Manual

serVice contact information

The control system has a discrete menu that installing contractors and/or service agents can access to enter contact information for
their customers. This contact information will be displayed with all Fault and Alert messages.
description/action
From the Desktop Screen (see Figure 55 on page 42) press and
hold down the middle (unmarked) Operational Button for 30
seconds and then release it.
This will launch a discrete menu where personalized contact
information can be entered.
Using the UP and DOWN buttons select (highlighted in black)
the "Show Contact information" menu item.
Press the Operational Button under "CHANGE" to activate the
adjustment mode for this parameter.
With the adjustment mode for "Show Contact information"
activated the selection bar will change from a black fill to a
black outline.
Use the Up and Down Buttons to change the setting from
"No" to "yes" and press the Operational Button underneath
"UPDATE" to save the new setting.
note: The Access Code at the bottom of the Service Contact
information screen is for manufacturing engineering purposes
only. There are no user settings or information accessed
through this menu item.
Using the UP and DOWN buttons select (highlighted in black)
the "Change Contact Name" menu item.
Press the Operational Button under "SELECT" to open the
Change Contact Name menu.
Follow the on screen instructions to enter your name or the
name of your company. There is a maximum of 20 character
spaces for this purpose.
When finished press the Operational Button "UPDATE" to save
the new Contact Name. The control system will return to the
discrete menu.
Using the UP and DOWN buttons select (highlighted in
black) the "Change Contact Phone" menu item and press the
Operational Button under "SELECT".
Follow the on screen instructions to enter a new Contact Phone
number and press the Operational Button under "UPDATE" to
save the new phone number.
When the new Contact Name and Contact Phone number
have both been updated, press the Operational Button under
"BACk" to return to the Desktop screen.
Service Contact Information
Show Contact Information
Change Contact Name
Change Contact Phone
Current Contact Info:
(000) 000-0000
Access Code
CHANGE
Service Contact Information
Show Contact Information
Change Contact Name
Change Contact Phone
Current Contact Info:
(000) 000-0000
Access Code
UPDATE
Service Contact Information
Show Contact Information
Change Contact Name
Change Contact Phone
Current Contact Info:
(000) 000-0000
Access Code
SELECT
Enter the service contact below:
- -
Use the > and < keys to move between
characters. Use the UP and DOWN keys to
change the character.
NAME: _
-
<
Service Contact Information
Show Contact Information
Change Contact Name
Change Contact Phone
Current Contact Info:
YOUR COMPANY NAME HERE
(123) 456-7890
Access Code
49
display
No
BACK HELP
Yes
CANCEL
Yes
BACK HELP
-
>
UPDATE
Yes
BACK HELP