Table of Contents
Advertisement
Service Manual
1.Speaker(on the Furnished Underfilling)
3)
Before assemble battery on the Furnished Underfilling, make sure the RF cable is well assembled
on the Furnished Underfilling.
4)
Assemble the cameras to the Main PCBA according to the following picture
Back camera_13M
Bac camera_2M
5)
Before assemble main PCBA on the Furnished Underfilling, make sure the FPC SIDEKEY, Back
camera_13M, 13M B_CAM_Rubber, Front camera_5M, 5M FNT_CAM_Rubber are well
assembled.
There is "thermal gel" between main PCBA and Furnished Underfilling. If a new main PCBA
6)
or Furnished Underfilling or both of them were repalced, new thermal gel should be filled.
Rev.: 1.0
Confidential and proprietary information contained in this repair guide is subject to change without notice.
Distribution, transfer, copy of any content or data in this document without the written permission of TCL is strictly prohibited.
TCL Communication Technology Holdings Ltd.
2.Speaker(on the Furnished Bottom Support)
TCL 408_T507D1_Service Manual V1.0
Front camera_5M
Page: 24/30
Advertisement
Table of Contents
