Table of Contents
Advertisement
OPERATION
1.
Place power switch in the ON / "I" position.
2.
Extend the catch tray as required.
3.
Set the self-centring paper side guides for the width of
the paper and lock in position using thumbscrews.
(Fig 6)
4.
Adjust in-feed tray tension lever (Fig 7) for different
paper weights. Move the lever up towards the "-"
symbol for lighter paper and down toward the "+"
symbol for heavier paper. The middle position is for
standard paper weights.
5.
Raise the in-feed tray lever to lower the in-feed tray.
(Fig 8)
6.
Neatly stack forms on the in-feed tray.
7.
Lower the in-feed tray lever to raise the in-feed tray.
Fig. 6
Fig.7
In-feed Tray
Fig.8
5
Self centering side guides
Tension Lever
In-feed Tray Lever
Advertisement
Table of Contents
