ASROCK B650M PRO RS User Manual page 59

Correct Installation:
The SSD's PCB is in proper place, and
the M.2 heatsink can be screwed in.
Incorrect Installation:
The SSD's PCB sits between M.2 heatsink
and standoff. Do not continue.
2
For the latest updates of M.2 SSD module support list, please visit our website for details:
http://www.asrock.com
3
1
Step 7
Before securing the M.2 heatsink,
make sure to align the notch on
the SSD to the standoff on the
motherboard if you use a Type 2280
SSD module; otherwise, the SSD
module may be damaged.
Step 8
Tighten the screws with a screwdriver
to secure the module (if your M.2
SSD module is Type 2280) and M.2
heatsink into place in the order
shown. Tighten screw opposite the
M.2 connector first (2), and then
tighten the one next to the M.2
connector (3).
*Please do not overtighten the screw
as this might damage the module and
M.2 heatsink.
B650M Pro RS WiFi
B650M Pro RS
55