Table of Contents
Advertisement
4
|
Quick guide
4.3 Domestic hot water
User reference guide
14
Select slope or offset.
Increase or decrease the slope/offset.
When slope is selected: set slope and go to offset.
When offset is selected: set offset.
Confirm changes and return to the submenu.
2-points curve
Y2
Y1
X1
X2
X1, X2 Outdoor ambient temperature
Y1, Y2 Desired leaving water temperature
Go through the temperatures.
Change the temperature.
Go to the next temperature.
Confirm changes and proceed.
More information
For more information, see also:
▪
"5.4 Turning operation ON or
▪
"5.6 Space heating/cooling
▪
"5.8 Preset values and
▪
"5.9 Weather-dependent
To turn tank heating operation ON or OFF
NOTICE
Disinfection mode. Even if you turn OFF tank heating operation ([C.3]: Operation >
Tank), disinfection mode will remain active. However, if you turn it OFF while
disinfection is running, an AH error occurs.
1 Go to [C.3]: Operation > Tank.
C.3
Operation
Space heating/cooling
Tank
2 Set operation to On or Off.
Possible actions on this screen
Possible actions on this screen
4
OFF" [
24]
4
control" [
26]
4
schedules" [
34]
4
curve" [
44]
On
Off
ETVH/X12S(U)18+23EA6V+9W + ETBH/X12EF6V+9W
Daikin Altherma 3 H MT F+W
4P634888-1 – 2021.03
Advertisement
Table of Contents
