Table of Contents
Advertisement
t
Have defective cords replaced immediately.
u
Charge only between 4 ˚C and 40 ˚C.
v
Only for indoor use.
x
Discard the battery pack with due care for
the environment.
y
Charge D
WALT battery packs only with designated
e
D
WALT chargers. Charging battery packs other than
e
the designated D
e
charger may make them burst or lead to other
dangerous situations.
z
Do not incinerate the battery pack.
B
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
A
TRANSPORT (with built‑in transport cap). Example: Wh
rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
These battery packs may be used: DCB181, DCB182, DCB183,
DCB184, DCB184B, DCB185, DCB187, DCB189, DCBP034,
DCBP034G, DCBP518, DCB546, DCB547, DCB547G, DCB548.
Refer to Technical Data for more information.
Package Contents
The package contains:
1 Bandfile
1 Side Handle
2 80 Grit Abrasive Belt
1 Offset Accessory Arm
1 Dust Shroud
1 Charger
1 Li‑Ion battery pack (C1, D1, E1, G1, H1, L1, M1, P1, Q1, S1, T1, U1,
X1, Y1, Z1 models)
2 Li‑Ion battery packs (C2, D2, E2, G2, H2, L2, M2, P2, Q2, S2, T2, U2,
X2, Y2, Z2 models)
3 Li‑Ion battery packs (C3, D3, E3, G3, H3, L3, M3, P3, Q3, S3, T3, U3,
X3, Y3, Z3 models)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D
WALT is under license. Other trademarks and
e
trade names are those of their respective owners.
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
WALT batteries with a D
WALT
e
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
g
Wear ear protection.
f
Wear eye protection.
Wear respiratory protection.
n
Visible radiation. Do not stare into light.
Hot surface. Risk of burns. Do not touch.
Warning
Date Code Position (Fig. A)
The production date code
15
by a 2‑digit week and is extended by a 2‑digit factory code.
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Variable speed dial
1
Variable speed trigger
2
Lock‑off button
3
Main handle
4
Side handle
5
Belt tensioning lever
6
Belt tracking screw
7
Straight arm
8
Lock lever
9
Dust shroud
10
Dust port
11
Rotatable LED light
12
Battery pack
13
Battery release button
14
Date code
15
Intended Use
This bandfile is designed for sanding wood, metal, plastic and
painted surfaces.
For optimal balance, use 5Ah battery or smaller.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This bandfile is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
English
consists of a 4‑digit year followed
13
Advertisement
Table of Contents
