6-Rds17S-Elite-R1 Default Configuration - D&R ELECTRONICS RDS17S-ELITE1-R1 Installation Manual

6. RDS17S-ELITE-R1 DEFAULT TOUCHPAD CONFIGURATION
The touchpad setup is a standard factory default. For setup changes refer to the software manual for program-
ming. The labels can be rearranged as per customer's preference.
SLIDE SWITCH 1 — Activates STBY, Output 1 continuous ON and the rear of the lightbar.
SLIDE SWITCH 2— Activates SLIDE SWITCH 1 and Output 2 continuous ON and the front of the lightbar.
SLIDE SWITCH 3 — Activates SLIDE SWITCH 2 AND INTERSECTION LIGHTS button.
INTERSECTION LIGHTS — Activates Output 3 continuous ON and the intersection of the lightbar.
HEAD LT. FLASH — Activates Output 4 & 5 flashing.
LEFT ALLEY — Activates Output 6 continuous ON and the left alley of the lightbar.
RIGHT ALLEY — Activates Output 7 continuous ON and the right alley of the lightbar.
TAKE DOWN — Activates Output 8 continuous ON and the take down of the lightbar.
ANTI-THEFT — Activates Output 12 MOMENTARY, with IGNITION ON only.
STBY/PA — Momentary AIR HORN (optional can be programmed to momentary WAIL).
INTER-CLEAR — Activates the INTER-CLEAR tone.
NOTE: - Activates the MULTI-TONE tone when the system is configured with dual siren amplifier.
WAIL — Activates the WAIL tone.
YELP — Activates the YELP tone.
STINGER — Activates the STINGER tone.
MANUAL — Activates momentary the WAIL tone.
AIR HORN — Activates momentary the AIR HORN tone.
HANDS FREE— The Hands-Free mode is activated when STBY or any of the siren tones is selected using
the ROTARY switch. A first press of the horn ring it will activate the WAIL tone. A second press it will
activate the YELP tone. A third press it will activate the STINGER tone. A fourth press it will activate
again the WAIL tone. This cycle continues until the user deactivates the Hands-Free mode. Pressing
the horn ring twice, in a quick succession, when STBY is selected it will turn OFF the siren tone and
sets the system into Hands-Free ready mode. Pressing the horn ring twice, in a quick succession,
when any of the siren tones is selected it will activate the siren tone selected by the ROTARY switch
and sets the system into Hands-Free ready mode. Moving the rotary switch from the STBY or any of
the siren tones position will turn OFF the siren tone and deactivates the Hands-Free mode.
CONTROL — Activates Output 9 as 9 second timer, with IGNITION ON only.
ARROW DIRECT — Activates Output 13 & Output 14 as 2 trigger traffic director:
LEFT ARROW—Output 13 continuous ON.
RIGHT ARROW—Output 14 continuous ON.
CENTER OUT—Output 13 & Output 14 continuous ON.
7 Jan 15, 2020