Chamberlain 85870 Manual page 30

Operation
Connect With Your Smartphone
The Wi-Fi Garage Door Opener is compatible with up to 16 myQ
devices can be paired to the Wi-Fi garage door opener's internal gateway. These devices can be
®
controlled with the myQ App. These devices include any combination of myQ
openers, Wi-Fi garage door openers, myQ
commercial door operators. A LiftMaster Internet Gateway (828LM) can be added if you need to
control more than 10 devices using the myQ
opener itself (controlled by garage door opener through 900MHz). These devices include any
®
combination of myQ light controls or a garage door and gate monitor.
YOU WILL NEED:
• Wi-Fi enabled smartphone, tablet or laptop
• Broadband Internet Connection
• Wi-Fi signal in the garage (2.4 GHz, 802.11b/g/n required), see page 4
• Password for your home network (router's main account, not guest network)
• myQ ®
serial number located on the garage door opener
CONNECT YOUR GARAGE DOOR OPENER TO YOUR HOME WI-FI NETWORK
1. Use the Smart Control Panel®, go to Menu > Program > Wi-Fi Setup OR press and release
the yellow LEARN button on the garage door opener 3 times. The garage door opener will
beep once. You have 20 minutes to complete the connection process.
2. On your mobile device, go to Settings > Wi-Fi and select the network with the "MyQ-" prefix.
3. Launch the web browser on your smartphone or tablet. Enter setup.myqdevice.com into the
browser address bar. Follow the on screen prompts to connect the garage door opener to
your Wi-Fi network. The myQ serial number will display on screen.
Write the serial number in the space below:
4. Download the myQ app from the App Store® or Google Play™ store. Sign up for your myQ
account and add the myQ serial number to your account.
To add a second Wi-Fi garage door opener, repeat steps 1-3. Add the second myQ serial number to
your account in the myQ app.
®
enabled accessories. Up to 10
®
garage door
® ®
light controls, myQ gate operators or myQ
®
App. Up to 6 devices can be paired to garage door
®
LED
Blue
Blue and Green
Green
NOTES:
To erase the Wi-Fi settings, see page 33.
If you need help adding devices to your myQ account, or to learn more go to
WiFiHelp.LiftMaster.com.
30
An LED on the garage
door opener will indicate
Wi-Fi status. See table
below.
Navigation
Buttons
WiFi Status
Definition
Off - Wi-Fi is not turned on.
Blinking - Garage door opener is in Wi-Fi learn mode.
Solid - Mobile device connected to the garage door opener.
Blinking - Attempting to connect to router.
Blinking - Attempting to connect to the Internet server.
Solid - Wi-Fi has been set up and garage door opener is connected to the
internet.
Learn
Button
LED