Troubleshooting - Panasonic EW DL84 Operating Instructions Manual

Troubleshooting

Problem
The charge status lamp
does not turn on.
The charge status lamp
is blinking rapidly.
(Twice every second)
EW-DL84_CH.indb 35
Possible cause
You have just purchased the toothbrush
or have not used it for a while.
The temperature is too low or high
while charging.
Action
The toothbrush may not blink or turn on
for several minutes after starting to charge
it, however it will turn on if you continue to
charge it. If it continues to blink after a
while, contact the store where you
purchased the unit or contact a service
center authorized by Panasonic for repair.
Charge the toothbrush within the
recommended charging temperature of 5 °C
to 35 °C. If it continues to blink even when
charging within the recommended charging
temperature, contact the store where you
purchased the unit or contact a service
center authorized by Panasonic for repair.
35
2013/05/09 19:42:22