How To Set Up The Device And Precautions - Inter-m RM-N10 Operation Manual

NETWORK SYSTEM REMOTE MIC STATION

How To Set Up The Device And Precautions

How To Set Up The Device And Precautions
1. BOOT SCREEN: AFTER THE POWER SUPPLIED TO THE DEVICE, AN APPROPRIATE DESCRIPTION
DISPLAY ON THE BOOT SCREEN.
- INITIAL SCREEN
1) A "Welcome" message will appear on the screen during the booting and OS initialization process.
2) When the app is launched, the message will disappear for 5 seconds, then reappear on the screen.
3) When the app is launched after OS initialization, a "Booting... ", " Initializing..." message will
appear on the screen. (Takes approximately 30 seconds)
- STANDBY SCREEN
1) When booting is complete, the standby screen will appear. If the device is connected to a
network, the IP will appear on the screen. (Initial IP: 192.168.1.99)
The operation mode on right upper side indicates it as per 6. Talk Protocol in the setting.
(Simple mode can be changed to preset key on the standby screen)
For Isls-CP mode
※ Please refer to 6. Talk Protocol in the manual regarding setting the Talk Protocol.
※ The IP can be changed from the web page of the device. Please refer to the software manual
for more details.
2) Before using the device, the registration of device and source(RM) is required through the
integrated management software.
※ For more details, please refer to the manual of integrated management software.
3) The EVENT & PRESET can be set up on system set-up menu of the integrated management software.
4) If there is no input for 30 seconds on the standby screen, it switches to the sleep screen.
8
RM-N10
For Isls-Group mode For Isls-Zone mode