Table of Contents
Advertisement
– Use of the machine by more than one person.
IMPORTANT Improper use of the machine will
invalidate the warranty, relieve the Manufacturer from
all liabilities, and the user will consequently be liable
for all and any damage or injury to himself or others.
3.1.3
User types
This machine is intended for use by consumers,
i.e. non-professional operators.
It is intended for "DIY" use only.
IMPORTANT The machine must be
used exclusively by one operator.
3.2
SAFETY SIGNS
The machine has various symbols on it (Fig. 2).
Their function is to remind the operator of the correct
conduct for use, with due care and caution.
Meaning of symbols:
Warning. Read the instructions
before operating the machine.
Danger! Risk of thrown objects.
Keep all persons away from the
work area whilst working.
Only for lawn mower with
combustion engine.
Be careful when using the sharp
cutting means. Do not put hands or
feet near or under the opening of the
cutting means. The cutting means
continues to turn even after the motor
has been switched off. Remove the
safety key (deactivation device) before
any maintenance is carried out.
Danger! Danger of cutting yourself.
Cutting means in motion. Do not
put hands or feet near or under the
opening of the cutting means.
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an Authorised Service Centre.
3.3
IDENTIFICATION LABEL
The identification label holds the following data (Fig.1).
Sound power level.
1.
2.
Conformity marking.
3.
Year of manufacture.
4.
Type of machine.
5.
Serial number.
6.
Name and address of Manufacturer.
7.
Article code.
8.
Max. motor operation speed.
9.
Weight in kg.
10. Power voltage and frequency.
11. Electrical protection rating.
12. Nominal power.
Write the identification data of the machine in the specific
space on the label on the back of the cover page.
IMPORTANT Quote the information on
the product identification label whenever you
contact an Authorised Service Centre.
IMPORTANT The example of the Declaration of
Conformity is provided on the last pages of the manual.
3.4
MAIN COMPONENTS
The machine is composed of a series of main
components that have the following functions (Fig.1):
A.
Chassis: this is the casing that houses
the rotating cutting means.
B.
The engine: drives both the cutting means
and the wheel traction (if available).
C.
Cutting means: the element
designed to cut the grass.
Handle: this is the operator's work station.
D.
It is long enough to ensure the operator
remains at a safe distance from the
rotary cutting means whilst working.
Battery (if it is not supplied with the machine,
E.
see chapter 15 "accessories on request""):
provides the energy for starting the motor;
its specifications and regulations for use
are described in a specific manual.
F.
Operator presence lever: this lever enables
the cutting means and drive to be operated. The
motor stops when both levers are released.
G.
Drive engagement lever: this lever
engages the drive to the wheels and
allows the machine to move forward.
H.
Hatch for accessing the battery compartment
I.
Safety key (Deactivation device): The key
enables / disables the machine electric circuit.
J.
Battery charger
machine, see chapter 15 "attachments on
request"): device used to recharge the battery.
4.
ASSEMBLY
The safety regulations to follow are described in
chap. 2. Strictly comply with these instructions to avoid
serious risks or dangers.
For storage and transport purposes, some components of
the machine are not installed in the factory and have to be
assembled after unpacking. Follow the instructions below.
Unpacking and completing the assembly should
be done on a flat and stable surface, with enough
space for moving the machine and its packaging,
always making use of suitable equipment. Do not use
the machine until all the instructions provided in the
"ASSEMBLY" section have been carried out.
EN - 4
(if it is not supplied with the
Advertisement
Table of Contents
