Download Print this page

Important Safety Instructions; Maintenance - Master MF 30 DV User And Maintenance Book

Advertisement

BG

1... IMPORTANT SAFETY INSTRUCTIONS

CZ
2... OPERATING INSTRUCTION
DE

3... MAINTENANCE

►►
IMPORTANT SAFETY INSTRUCTIONS
DK
CAUTION: READ AND FOLLOW ALL INSTRUC-
EE
TIONS BEFORE OPERATING THIS FAN.
ES
Use the fan only as described in this manual. Misuse may
cause a fire or an electrical shock.
► 1. Do not operate the fan with a damaged cord or plug,
FI
after the fan malfunctions, has been dropped or damaged.
► 2. Close supervision is necessary when this fan is used
FR
near children, the elderly and pets.
► 3. Always turn the fan off after use, before cleaning,
GB
or moving location.
► 4. Do not insert fingers or other objects into the fan
guard.
HR
► 5. Do not operate the fan in areas where petrol, paint
or other flammable liquids are used or stored.
H
► 6. Do not place the fan near an open flame, cooking
or heating appliance, or hot surface.
IT
► 7. This fan is not intended for use in wet or damp loca-
tions. Never locate the fan in an area where it may fall into
a bath or other water container.
LT
► 8. Always use on a dry, level surface.
► 9. Do not let the power cord hang over the edge of
LV
a table or counter.
► 10. Arrange the cord away from an area where it may
NL
be tripped over.
► 11. Never place the power cord under a carpet or rug.
► 12. To disconnect from the power supply, grip the plug
NO
and pull from the power socket. Never pull by the cord.
► 13. This fan should not be operated outside.
PL
► 14. Do not hang or mount the fan on a wall or ceiling.
► 15. Do not operate without fan guard properly in place.
RO
► 16. If the power cord is damaged, it must be replaced
by the manufacturer or a qualified service engineer to avoid
any risks to safety.
RU
►►
OPERATING INSTRUCTION
SE
To adjust airflow upward or downward: Tilt the fan head
to the desired angle by hand easily Speed Control: Rotate
SI
SWITCH to LOW or HIGH speeds for respective air veloc-
ity.
► 1. After continuous operation, it is normal for the motor
SK
to feel warm when touched.
► 2. This fan features an overheat safety cut-out device,
UA
which will automatically shut the fan off should it overheat
for any reason. If this happens immediately unplug the fan
SE
from the power socket.
►►
MAINTENANCE
SI
► 1. Before cleaning turn the fan off and unplug from
the power supply.
SK
► 2. To clean the fan use a soft cloth to wipe off any dust.
If the fan is very dirty use a damp cloth and wipe dry. Do not
TR
use any cleaning detergents, sprays or other chemicals,
as they will damage the plastic.
► 3. Store the fan in the original packaging in a ventilated
UA
dry area.
PARAGRAPH SUMMARY
► 4. The motor bearings are permanently sealed and
do not require additional lubrication.
WARNING
Do not operate the fan with a damaged cord or plug, after
the fan malfunctions, has been dropped or damaged.
Do not use extension cords with this product!
To reduce the risk of fire or electrical shock, do not use
the product with a solid state speed control device.
CAUTION
Automatically operated device-To reduce the risk of injury
disconnect from power supply before servicing.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capa-
bilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.

Advertisement

loading