Warranty Statement - Havener Enterprises EVEN CUT Parts & Owner's Manual

This edger/trimmer is warranted for one (1) year from the original date of purchase against defects
in material or workmanship, when operated and maintained in accordance with the Owner's Manual.
The Manufacturer will replace or repair, free of charge, any part of the original equipment returned
to us or our authorized servicing representative with transportation or postage prepaid and which
upon examination shall be defective. The cost of replacing items that are subject to normal wear,
such as but not limited to: air filters, belts, blades, oil filters, and tires, will be borne by the
purchaser/owner unless such wear was caused by a defect in material and workmanship.
This warranty does not cover any unit that has been subject to neglect, negligence, misuse, or
accident, or that has been operated in any way contrary to the operating instructions as specified in
the Owner's Manual. This warranty does not cover any edger that has been altered or modified
changing performance or durability. In addition, the warranty is not extended to repairs made
necessary by the use of parts or accessories which, in the reasonable judgement of the
Manufacturer are compatible with the edger or adversely affect its operation, performance, or
durability. This warranty is not transferrable.
The Manufacturer assumes no responsibility or incidental, consequential, or other damages
including, but not limited to: expense for gasoline, expense of delivering the equipment to an
authorized dealer and expense of returning it to the owner, mechanic's travel time, telephone or
communication charges, rental of a like product during the time warranty repairs are being
performed, travel, loss or damage to personal property, loss of revenue, loss of the use of the time
or inconvenience. There are no other expressed or implied warranties and liability for consequential
damages under this warranty and are excluded to the extent exclusions are permitted by law.
No warranty service will be authorized until your registration card has been received by the
Manufacturer.
Engine: 4HP gasoline
starting mode: Recoil starting
Transmission Type: soft belt
Blade: 1 8-3/4" x 2", 1/2" center hole
Noise: ≤70db
Net Weight: 31kg;68-1/2lbs

Warranty Statement

Main technical parameter
Cutting angle: Adjustable by 5 shifts from 20°-0°/0°-20°
Wheels-Front/Rear: 8"x1-3/4"
Outer Dimension(L x W x H): 1030x460x900mm
Outer Dimension(L x W x H):40-1/2"x18-1/10"x35-1/2"
Packing Measurement(L x W x H):700x460x410mm
Packing Measurement(L x W x H):27-1/2"x18-1/10"x16"
4