Page 1
INSTALLATION INSTRUCTIONS AND HOMEOWNER’S MANUAL R02P033 2-Stage WiFi Thermostat Phone App Thermostat Printed in Canada on 2023-02-13 X00499 Rev.D 100% recycled paper...
Page 2
INSTALLING OR OPERATING THIS CONTROL AND SYSTEM COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. PRODUCT OVERVIEW WARNING Thermostat installation The R02P033 2-Stage WiFi Smart Thermostat combines user- components control system friendly touch sensitive buttons with WiFi wireless smart control shall conform to Class II circuits per the application, offering unparalleled user control.
1 Installation 1.1 Wiring Step 1: Separate the thermostat from its base by holding point A and B and pulling apart. Insert the wires into the corresponding terminals following the wiring diagram for the appropriate system. Fasten the wall plate to a mounting box with the provided M x 25 mm screws. Ensure the proper orientation of the wall plate with the arrows on it pointing Up.
1.2 Wiring Diagram (a) Conventionnal system (b) Heat pump system Terminal Definition Information Cooling Power (if 2 transformers) Jumpered with R (if only one transformer) Heating Power W (O/B) Heating output Reversing valve output (heat pump) Cooling output Compressor output (heat pump) Fan output Cooling output 2 stage...
2 Operation 2.1 Display and Controls Temperature set point can be adjusted using . Normal display resumes after a short delay, or by pressing 2.2 Display Settings Temperature display Not available in Hold or Hold Until modes. On the main screen, press simultaneously to switch the display between degrees Celcius and Fahrenheit.
2.3 Operating Settings Operating Mode At the main display, slowly press to switch among OFF, Heat, Auto. EM Heat and Cool. After the state change, Set to will be displayed and the temperature value will flash for 5 seconds. During this time, the temporary temperature set point can be adjusted.
2.4 Schedule Settings Press to switch between Schedule, Hold and Hold Until (Holiday) scheduling options. Schedule Each of stand for one time period of the day. Setting the schedule is only possible if one of these four icons is displayed, and the system mode not is set to OFF.
2.5 App and Wi-Fi Mobile App To download, search "Smart Life" in the App Store or Google Play, or scan the QR code on the cover page of this manual. Access rights can be shared between users registered with the application.
2.7 Self-Check The thermostat can perform a self-check. To run it, press for 3 seconds. The thermostat version will be displayed during the test. When completed, the main screen will be displayed if everything is normal. 2.8 Factory Reset To reset all settings to factory defaults, hold for 3 seconds.
Need help?
Do you have a question about the R02P033 and is the answer not in the manual?
Questions and answers