Dettson R02P033 Installation Instructions And Homeowner's Manual
  1. Manuals
  2. Brands
  3. Dettson Manuals
  4. Thermostat
  5. R02P033
  6. Installation instructions and homeowner's manual

Dettson R02P033 Installation Instructions And Homeowner's Manual

2-stage wifi thermostat
Hide thumbs Also See for R02P033:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTALLATION INSTRUCTIONS AND
HOMEOWNER'S MANUAL
R02P033
2-Stage WiFi Thermostat
Phone App
Thermostat
Printed in Canada on
2020-04-20
X00499 Rev.A
100% recycled paper

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R02P033 and is the answer not in the manual?

Questions and answers

Related Manuals for Dettson R02P033

Summary of Contents for Dettson R02P033

  • Page 1 INSTALLATION INSTRUCTIONS AND HOMEOWNER’S MANUAL R02P033 2-Stage WiFi Thermostat Phone App Thermostat Printed in Canada on 2020-04-20 X00499 Rev.A 100% recycled paper...
  • Page 2 INSTALLING OR OPERATING THIS CONTROL AND SYSTEM COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. PRODUCT OVERVIEW WARNING Thermostat installation The R02P033 2-Stage WiFi Smart Thermostat combines user- components control system friendly touch sensitive buttons with WiFi wireless smart control shall conform to Class II circuits per the application, offering unparalleled user control.

  • Page 3: Table Of Contents

    Table of Contents Installation 1.1 Wiring ................. . . 1.2 Wiring Diagram .

  • Page 4: Installation

    1 Installation Wiring Step 1: Separate the thermostat from its base by holding point A and B and pulling apart. Insert the wires into the corresponding terminals following the wiring diagram for the appropriate system. Fasten the wall plate to a mounting box with the provided M x 25 mm screws. Ensure the proper orientation of the wall plate with the arrows on it pointing Up.

  • Page 5: Wiring Diagram

    Wiring Diagram (a) Conventionnal system (b) Heat pump system Terminal Definition Information Cooling Power (2 transformers) Jumpered with R (only one transformer) Heating Power W (O/B) Heating output Reversing valve output (heat pump) Cooling output Compressor output (heat pump) Fan output Cooling output 2 Compressor output 2 stage (heat pump)

  • Page 6: Operation

    Operation Display and Controls Temperature set point can be adjusted using . Normal display resumes after a short delay, or by pressing Display Settings Temperature display Not available in Hold or Hold Until modes. On the main screen, press simultaneously to switch the display between degrees Celcius and Fahrenheit.

  • Page 7: Schedule Settings

    the temporary temperature set point can be adjusted. OFF: In this state, the system will not be running. Auto: In this state, the system will maintain the set temperature, automatically switching between heating and cooling based on room temperature. Heat: If the room temperature is 1°C colder than the set point, the thermostat will display Heat on and activate the first heating stage.
  • Page 8 1. Press and then use to set the blinking hour, minute and temperature value for the chosen time period. 2. Press to switch to the temperature setting, and adjust using 3. Press to switch to the next time period of the current day, and repeat steps 1 and 2. Press to save and switch to the next day.

  • Page 9: Wifi And App

    WiFi and App WiFi Network Configuration 1. Power on the thermostat. 2. Press for 3 seconds, until the WiFi icon starts blinking. 3. Use until -E- is displayed, and confirm with 4. Follow the instructions indicated on the phone application. Mobile App To download, search "Plus Thermostat"...

  • Page 10: Installer Menu

    Installer Menu to reach the installer menu. Password is 5138 . In Schedule mode, hold to change the setting. Press to move to the next menu item. Item Parameter Range Default Note O/B selection 0.0 / 1.1 0.0: 0; 1.0: B System mode 0.0 - 7.0 See section 1.3...

Table of Contents