Front Wheel - Yamaha TT-R110EL 2019 Owner's Manual

Periodic maintenance and adjustment

Front wheel

To remove the front wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Slide the rubber cover back at the
brake lever.
2. Loosen the locknut, and then turn
the brake lever free play adjusting
bolt fully in direction (a).
1
7
(a) (a)
1. Rubber cover
2. Brake lever free play adjusting bolt
3. Locknut
3. Loosen the axle nut.
1. Axle nut
2. Washer
EAU24361
EAU56491
EWA10822
3
2
4. Lift the front wheel off the ground
according to the procedure in the
previous section "Supporting the
motorcycle".
5. Remove the axle nut and washer.
6. Pull the wheel axle out.
1. Wheel axle
7. Remove the brake shoe assembly
from the wheel hub by pulling it
out.
1
1. Brake shoe assembly
8. Remove the wheel.
To install the front wheel
1. Install the brake shoe assembly
into the wheel hub.
2. Lift the wheel up between the fork
legs.
TIP
Make sure that the slot in the brake
shoe plate fits over the retainer on the
fork leg.
7-30