KTM F8201T5 Setup Instructions page 19

3.7 Mounting the seat
3.8 Removing the air filter box cover
–
Remove screw
F01533-10
–
Raise the rear of the seat, pull the seat back, and lift it off.
H02218-10
–
Mount the front of the seat on the collar bushing of the fuel
tank, lower the seat at the rear, and push the seat forward.
H02218-11
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
F01533-10
Condition
The air filter box cover is secured.
–
Remove the seat. (
1
.
1
.
M6 10 Nm (7.4 lbf ft)
p. 16)
WORK 3
17