Info
Read the accompanying KTM PowerParts fitting instruc-
tions.
–
Attach the stickers included in the scope of supply (optional).
–
Refuel. (
p. 23)
–
Position all controls in their exact positions on the handlebar.
Tighten all screws.
–
Remove the remaining films, padding, the corrugated card-
board, and the other packaging material.
–
Prepare the vehicle according to the specifications in
KTM Dealer.net for handover to the customer.
Info
Transport mode must be deactivated to be able to start
the motorcycle.
SETUP 2
13