Table of Contents
Advertisement
Problem
Leaks water.
Has odours.
No bubbles are seen
(Bubble models only).
A message appears on
the display to alert that
dispenser is open.
Increased time of
washing.
If a problem persists, contact a service center. The number of the service center is on the label attached to
the product.
Untitled-1 57
• Make sure the door is properly closed.
• Make sure all hose connections are tight.
• Make sure the end of the drain hose is correctly inserted and secured to the
drain system.
• Avoid overloading.
• Use high efficiency (HE) detergent to prevent oversudsing.
• Check the drain hose.
-
Make sure the end of the drain hose is not placed on the floor.
-
Make sure the drain hose is not clogged.
• Check if there is something stuck between the door and the diaphragm.
-
If there is something stuck between the door and the diaphragm, it may
cause a leak or damage to the diaphragm.
• Excessive suds collect in recesses and can cause foul odours.
• Run cleansing cycles to sanitise periodically.
• Clean the door seal (diaphragm).
• Dry the washing machine interior after a cycle has finished.
• You may not be able to see bubbles if there is too much items in the drum.
• Severely contaminated laundry may not generate bubbles.
• Check if the detergent drawer is closed properly.
-
Open the detergent drawer and close it again. Make sure it's closed
properly.
• The actual washing time may differ from the estimated time initially
displayed on the control panel upon cycle selection.
Action
English 57
2022-09-28
3:07:36
Advertisement
Table of Contents
