Before Starting; Notices To The User - Kenwood TH-D75A User Manual

BEFORE STARTING

Thank You
We are grateful you decided to purchase this KENWOOD
Digital transceiver.
The models listed below are covered by this manual.
TH-D75A: 144/220/430MHz TRIBANDER (The Americas)
TH-D75E: 144/430MHz DUAL BANDER (E type: Europe/ T
type: UK)
Features
This transceiver has the following main features:
• Includes a program for dealing with data formats supported
by Automatic Packet Reporting System (APRS
─ Compliant with a digipeater.
• Compliant with voice/digital mode D-STAR digital amateur
radio networks.
─ Compliant with D-STAR dual monitor.
─ Compliant with D-STAR hotspot lists.
─ Compliant with the reflector terminal mode.
• Built-in GPS receiver unit.
• Transflective color TFT Display.
• Weatherproof toughness equivalent to IP 54/55 standard.
• Wide-band and multi-mode reception.
• Two-wave simultaneous reception.
(VxU, UxV, UxU (TH-D75A/ TH-D75E), Vx220M, 220MxV,
Ux220M (TH-D75A)
• Equipped with IF filter for comfortable reception (SSB/CW).
• High-performance DSP-based voice processing.
• Built-in Bluetooth (SPP, HSP)
• microSD (2 GB to 32 GB)
• Compliant with the battery charge as well as data
transmission and reception by USB Type-C
• 1000 memory channels, 1500 repeater lists
• Transmit power 4-step switching (5/ 2/ 0.5/ 0.05 W)
Writing Conventions Followed in this Manual
The writing conventions described below have been followed
to simplify instructions and avoid unnecessary repetition.
Instruction
Press [KEY]. Momentarily press KEY.
Press and hold KEY for 1 second or
Press [KEY] (1s).
longer.
Press [KEY1], Press KEY1 momentarily, release
[KEY2]. KEY1, then press KEY2.
Press the F key to enter Function mode,
Press [F], [KEY]. then press KEY to access its secondary
function.
With the transceiver power OFF,
Press [KEY] +
press and hold KEY while turning the
Power ON.
transceiver power ON.
ATTENTION: (USA and CANADA only)
The RBRC Recycle seal found on KENWOOD
Lithium-ion (Li-ion) battery packs indicates
KENWOOD's voluntary participation in an industry
program to collect and recycle Li-ion batteries after
their operating life has expired.
The RBRC program is an alternative to disposing Li-ion batteries with your
regular refuse or in municipal waste streams, which is illegal in some areas.
For information on Li-ion battery recycling in your area, call (toll free)
1-800-8-BATTERY (1-800-822-8837).
KENWOOD's involvement in this program is part of our commitment to
preserve our environment and conserve our natural resources.
).
®
.
TM
Action
Information on Disposal of Old Electrical and Electronic Equipment and
Batteries (applicable for countries that have adopted separate waste
collection systems)
Products and batteries with the symbol (crossed-out wheeled bin)
cannot be disposed as household waste.
Old electrical and electronic equipment and batteries should be
recycled at a facility capable of handling these items and their waste
byproducts.
Contact your local authority for details in locating a recycle facility
nearest to you.
Proper recycling and waste disposal will help conserve resources
whilst preventing detrimental effects on our health and the
environment.

NOTICES TO THE USER

SUPPLIER'S DECLARATION OF CONFORMITY
47 CFR § 2.1077 Compliance Information
Trade name: KENWOOD
Model(s): TH-D75A, AC adapter (W0H-0160)
Responsible party: JVCKENWOOD USA Corporation 1440
Corporate Drive, Irving, TX 75038 USA
Telephone number: 972-819-0700
One or more of the following statements may be applicable for
this equipment.
FCC WARNING
This equipment generates or uses radio frequency energy.
Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved by
the party responsible/ JVCKENWOOD. The user could lose the
authority to operate this equipment if an unauthorized change or
modification is made.
INFORMATION TO THE DIGITAL DEVICE USER
REQUIRED BY THE FCC
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can generate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that the
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
¡ Reorient or relocate the receiving antenna.
¡ Increase the separation between the equipment and receiver.
¡ Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
¡ Consult the dealer for technical assistance.
RF EXPOSURE INFORMATION FOR BLUETOOTH
This equipment complies with FCC/IC radiation exposure limits
and meets the FCC radio frequency (RF) Exposure Guidelines and
RSS-102 of the IC radio frequency (RF) Exposure rules.
This equipment has very low levels of RF energy that are deemed
to comply without testing of specific absorption rate (SAR).
This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.
This device complies with Industry Canada license exempt
RSS standard(s). Operation is subject to the following two
conditions : (1) this device may not cause interference,
and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
This product is designed for connection to an IT power
distribution system.
This product contains a CR Coin Cell Lithium Battery which contains
Perchlorate Material – special handling may apply. See www.dtsc.
ca.gov/hazardouswaste/perchlorate
3